Bedienungsanleitung Nuk Eco Control Audio 530D plus - 10256440 (Seite 14 von 22) (Englisch)

803240

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

• The TALK symbol is visible

only while the talk-back

function is active (see "6.7 Talking to your

baby" on page 37).

• The musical note symbol will be

visible only if lullabies have been

activated from the parent unit

(see "6.8 Lullabies" on page 38)

or baby unit (see "5.3 Lullabies" on

page 34).

• The lightbulb symbol will be

visible only if the nightlight has

been activated from the parent

unit (see "6.9 Nightlight" on

page 38) or baby unit (see

"5.4 Nightlight" on page 34).

• The battery symbol is also

always displayed and shows the

battery’s current charge level

(see "4.4 Power supply" on page 31).

• The loudspeaker

symbol always

shows you the

device’s current volume setting (see

"6.4Adjusting the volume control" on page

36 and "6.5Mute setting" on page 36).

If no bars are shown, then the device is

currently muted (see "6.5 Mute setting"

on page 36).

6.4 Adjusting the volume

control

• You can use the VOL + 13 and VOL - 14

buttons to set the volume at which you

hear the sounds emitted by the parent

unit.

Each time you press one of the buttons

you will hear a beep at the volume that is

currently set and the corresponding

LEDs 19 will be illuminated The louder

your chosen setting, the louder will be

any beeps and the more LEDs will light

up.

The display also

shows a number of

bars indicating the

current volume setting. The louder your

chosen setting, the louder the unit will

beep and the more bars will appear.

Note: When the VOX function is set to

low sensitivity (see "6.6 Using the VOX

function to adjust the transmission

sensitivity" on page 37), then quiet

sounds will not be transmitted regardless

of the volume setting. This means that

turning up the volume will not enable you

to hear anything more. If you want to hear

more of the sounds from the nursery you

will need to increase the transmission

sensitivity by selecting a higher VOX

level.

6.5 Mute setting

The parent unit can be “MUTED”. Sounds

from the nursery will then no longer be

transmitted.

1. Press the VOL - 14 button repeatedly

until no more beeps are heard.

No further sounds will be transmitted.

The display 15 shows

the loudspeaker symbol

with no bars.

The LEDs 19 will continue to indicate the

noise level in the nursery. The more LEDs

are lit the louder are the noises in the

nursery.

2. You can cancel the mute setting by

pressing the VOL + 13 key.

3. If the parent unit is muted and you

activate the talk-back function, the

volume will automatically return to the

first level.

Caution!



If you mute the parent unit and also activate

the lullabies then you will no longer have any

active monitoring function. The five LEDs

that display the volume 19 are switched off

while a lullaby is playing. If you also mute

the device then you will neither be able to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuk Eco Control Audio 530D plus - 10256440 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nuk Eco Control Audio 530D plus - 10256440

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info