Bedienungsanleitung Nuk Eco Control Video Display 550VD - 10749102 (Seite 27 von 36) (Englisch)

803238

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

6. Use the 25 or 28 button to move the

star in front of "LCD Auto Off".

7. Press the button 26 to view the next

submenu.

5 Min: The screen will switch itself off

after 5 minutes.

1 Min: The screen will switch itself off

after 1 minute.

OFF: The screen will remain on.

The active setting will be shown in green.

8. Use the 25 or 28 button to move the

star in front of the required time.

9. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

Note: If Eco-Mode is active while the screen

is switched off, you can still change a set-

ting in the main menu, but the screen will

otherwise be white, as video transmission is

deactivated in Eco-Mode. This is no cause

for concern - the device is still working as

intended. It simply means that Eco-Mode

has paused the video transmission because

your baby is asleep (see "4.5 Eco-Mode and

Full-Eco-Control" on page 52).

6.10 Room temperature

settings

The correct room temperature is particularly

important for baby’s healthful sleep. The

baby unit of this NUK baby monitor there-

fore has an integrated temperature sensor.

The temperature in baby's room is perma-

nently shown on the screen 19 and updated

automatically.

Note: Since the temperature sensor is inside

the baby unit it is important that you do not

cover it or place it near a heater. Direct sun-

light may also affect the reading.

The baby unit monitors the room

temperature and sends an alarm to the

parent unit when the set temperature limits

are exceeded.

Setting the temperature unit °C or °F:

1. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

2. Use the 24 or 27 button to

select the Temperature menu.

The selected symbol will be shown in red.

3. Press the button 26 to view the sub-

menu.

The temperature submenu has three set-

tings you can adjust:

°C/°F: Allows you to choose the unit of

temperature shown in the status bar of

the parent unit.

LIMIT: Allows you to set the upper and

lower limits for the temperature alarm.

ALARM: Allows you to enable and disa-

ble the temperature alarm when the room

temperature rises above or falls below

the set limits.

4. Use the 25 or 28 button to move the

star in front of "°C/°F".

At this point, you can still exit the sub-

menu by pressing the button 27. The

submenu will close and you will be

returned to the previous submenu. How-

ever, to continue with your settings, con-

tinue with the next step.

5. Press the button 26 to view the next

submenu.

The active setting will be shown in green.

6. Use the 25 or 28 button to move the

star in front of the required unit of tem-

perature.

At this point, you can still exit the sub-

menu by pressing the button 27. The

submenu will close and you will be

returned to the previous submenu. How-

ever, to continue with your settings, con-

tinue with the next step.

7. Press the button 26 to confirm your

setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuk Eco Control Video Display 550VD - 10749102 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info