Bedienungsanleitung Nuk Eco Control Video Display 550VD - 10749102 (Seite 32 von 36) (Englisch)

803238

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

The lullabies will play for the set time.

The corresponding symbol will be shown

in the status bar with a T to show that the

timer is active.

Note: After 15 seconds without any input

from you, the menu will be closed with the

settings unchanged and the parent unit will

return directly to monitoring mode.

8. To switch the timer off, select the option

OFF in this submenu.

6.12 Vibrating alarm

The parent unit is equipped with an inte-

grated vibrating alarm function. It is auto-

matically activated when you set the sound

volume to its lowest level, switching the par-

ent unit to mute (see "6.14 Mute function"

on page 71). It can also be activated if

required, e.g. for providing an additional

alarm notification function, and can be par-

ticularly helpful for the hard of hearing, in

addition to the visual information shown on

the screen and by the LEDs.

The parent unit will vibrate:

• if there is a high level of noise in the

monitored room

• when the battery charge becomes low

• if the parent unit goes out of range

• if the parent unit is unable to set up a

connection with the baby unit and/or if

the connection is interrupted

• if the temperature in the monitored room

rises above or falls below the set limits

• when a reminder alarm is signalled

• once, when the vibrating alarm is

activated

• once, when the parent unit is switched to

mute.

Note: If the parent unit is switched to mute

(see "6.14 Mute function" on page 71), the

vibrating alarm is automatically activated

and cannot be deactivated. This gives par-

ents a better chance of noticing an alarm or

warning on the device. In this case, the

vibrating alarm can only be deactivated by

raising the volume setting.

Activating the vibrating alarm

To activate the vibrating alarm, proceed as

follows:

1. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

2. Use the 24 or 27 button to

select the Vibrating alarm menu.

The selected symbol will be shown in red.

3. Press the button 26 to view the sub-

menu.

ON: Vibrating alarm will be activated.

OFF: Vibrating alarm will be deactivated.

The active setting will be shown in green.

4. Use the 25 or 28 button to move the

star in front of "ON".

At this point, you can still exit the sub-

menu by pressing the button 27. The

submenu will close and you will be

returned to the previous submenu. How-

ever, to continue with your settings, con-

tinue with the next step.

5. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

The corresponding symbol appears in the

status bar. The parent unit will now also

vibrate when an alarm is signalled.

Deactivating the vibrating alarm

To deactivate the vibrating alarm, proceed

as follows:

1. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

2. Use the 24 or 27 button to

select the Vibrating alarm menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuk Eco Control Video Display 550VD - 10749102 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info