Bedienungsanleitung Nuk Eco Control Video Display 550VD - 10749102 (Seite 33 von 36) (Englisch)

803238

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

The selected symbol will be shown in red.

3. Press the button 26 to view the sub-

menu.

ON: Vibrating alarm will be activated.

OFF: Vibrating alarm will be deactivated.

The active setting will be shown in green.

4. Use the 25 or 28 button to move the

star in front of "OFF".

At this point, you can still exit the sub-

menu by pressing the button 27. The

submenu will close and you will be

returned to the previous submenu. How-

ever, to continue with your settings, con-

tinue with the next step.

5. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

The corresponding symbol in the status

bar disappears.

Note: After 15 seconds without any input

from you, the menu will be closed with the

settings unchanged and the parent unit will

return directly to monitoring mode.

6.13 Setting the volume

• Use the VOL + 33 and VOL - 34 buttons

on your parent unit to set the volume at

which you wish to hear the sound

transmissions from the monitored room.

You will hear a beep at the appropriate

volume each time you press one of these

buttons. The louder your chosen setting,

the louder the unit will beep.

The display also shows a

number of bars indicating the

current volume setting. The louder your

chosen setting, the louder the unit will beep

and the more bars will appear.

Note: The transmitted sounds depend on

the VOX level setting (see "6.8 Setting the

VOX sensitivity level" on page 62). If a

low sensitivity level is set, low noises will

not be heard, not even if the volume is

increased. In other words, you will not be

able to hear more sounds from the moni-

tored room simply by raising the parent

unit's sound volume. If you wish to hear

more sounds from the monitored room,

you must increase the sound sensitivity

of the baby unit's microphone, by adjust-

ing the VOX level setting.

6.14 Mute function

The sound volume of the parent unit can be

set to "mute". Sounds from the monitored

room will then no longer be audible.

Attention! If the parent unit is switched to

audio monitoring only, i.e., video monitoring

has been deactivated (see "6.9 Switching

between audio and video monitoring" on

page 63), you will not be able to switch the

parent unit to mute. This prevents you from

losing all contact with your baby while using

the baby monitor.

1. To activate the mute function, press the

VOL - button 34 continuously until you

hear two beeps in short sequence.

The parent unit is now mute, meaning

that it will no longer emit any sounds at

all.

The corresponding symbol

appears in the centre of the

screen and the status bar, and the vibrat-

ing alarm is activated.

Note: If the parent unit is switched to mute,

the vibrating alarm is automatically activated

and cannot be deactivated. This gives par-

ents a better chance of noticing an alarm or

warning on the device. In this case, the

vibrating alarm can only be deactivated by

raising the volume setting.

2. To deactivate the mute function, press

the VOL + button 33.

This raises the sound volume of the par-

ent unit, and cancels the mute function

and the automatic vibrating alarm. The

corresponding symbols in the status bar

disappear.

Note: If you use the talk-back function (see

"6.15 Talk-back function" on page 72) while

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuk Eco Control Video Display 550VD - 10749102 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info