Bedienungsanleitung Oce OP1016 Operation Guide Command Center (Seite 21 von 25) (Englisch)

47327

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

COMMAND CENTER

6-10 Advanced > Management / E-mail: POP3: General

This section shows how to make the settings for POP3 Protocol. POP3 is used to

receive remote print jobs via e-mail.

6-11 Advanced > Management / E-mail: POP3: Account

This makes the settings for receiving and printing e-mail. Up to three e-mail accounts

can be registered. Received e-mails can be filtered by size, title, To, CC or From.

Attached files can be received and printed.

Item Description

POP3 Protocol Enables (On) or disables (Off) the POP3 protocol.

Check Interval Checks e-mails in POP3 server at specific interval. Specify the interval in

the range from 3 minutes to 60 minutes. The default is 15 minutes.

Run once now Click the Run once now button to immediately receive e-mail from the

POP3 server.

Item Description

Account 1 (to 3) For Recipient 1 (to 3), Address enter the e-mail address of the intended

recipient. Entering a distribution list address is a simple way to send to

multiple recipients.

E-mail Address Under E-mail Address, check the box for each type of error condition to be

reported to the recipient.

POP3 Server Name Sets the POP3 host name (max. 78 characters). Enter the domain name

or IP address for the host name. You need to set the DNS server when you

use a domain name.

Test Buttton Click the Test button to check if the e-mail accounts settings are correct.

POP3 Port Number Specifies the POP3 port number. Use the default value (110).

The port number is usually a value in the range from 1 to 65535.

(max. 64 characters)

(max. 31 characters)

Use APOP Enables (On) or disables (Off) APOP. This setting must be enabled (On) to

connect to a mail server supporting APOP.

Delete e-mail after retrieval Selects whether to delete the e-mail received/printed from server or not.

E-mail Size Limit Except the e-mail over the specified size to be received. Even if Delete

e-mail after retrieval is Enable (On), it will not be deleted. When 0 is

specified, there is no limitation.

Filter Setting You can specify character strings for filtering e-mail (max. 255 characters).

The filtering methods are shown below.

• Use the s: string to filter the Subject condition.

• Use the T: string to filter the (To) condition.

• Use the C: string to filter the (Cc) condition.

• Use the F: string to filter the (From) condition.

• To filter using two or more conditions, insert | between each string.

• To filter using all conditions, insert & between each string.

For example, to print only the e-mails with a subject of Service or

Technical, specify: S:Service|S:Technical

Cover Page Enables (On) or disables (Off) the cover page. Specifies if the e-mail

header and body are printed when printing the e-mail.

• When set to On, the e-mail is printed with a cover page attached. If the

message has a text, it is printed as a cover page.

• When set to Off, only the attached file is printed. Nothing is printed if

there is no attached file.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oce OP1016 Operation Guide Command Center Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info