46798
21
Zoom out
Zoom in
Vorherige Seite
1/200
Nächste Seite
Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-9
Press the “OK” key. The message display will return to
the same screen as was displayed in step 2.
z Registering your station name
Enter the desired name for your station. (Refer to
“Entering Characters” on page 2-11.)
* Your station name can be up to 32 characters in length.
In the Character input screen, press the “End” key. The
message display will return to the same screen as was
displayed in step 2.
z Registering your station ID
Use the keypad to enter the desired station ID (4 digits).
* If you want to reset the displayed number to “0000”,
simply press the Stop/Clear key.
* If you want to revise the entered number, press the “
or “” cursor key to move the cursor to the number that
you want to change. Then enter the correct number as
desired.
(inch)
(metric)
Press the “Confirm” key. The message display will return
to the same screen as was displayed in step 2.
If you are finished making settings, press the Reset key to
return to the initial mode.
Setting the Current Date and Time
(Date & Time setting)
Set the date and the time that will appear in the message display
here. BE SURE that the date and time that you set here are correct
since they will serve as a basis for all communications that use the
timer.
* Prior to operation, check the message display to make sure that
the operation panel is in the initial mode for fax operation.
(Refer to “What Is The “Initial Mode”?” on page 1-11.)
* If you want to cancel the procedure part way through, press the
Reset key.
Press the “Register” key. The Registration Select screen
will appear.
(inch)
(metric)
Press the “Date & Time” key. The currently registered
information will be displayed.
(inch)
(metric)
4
5
6
7
8
9
1
2
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oce OP31C Fax System wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info