Bedienungsanleitung Oce OP31C Fax System (Seite 23 von 200) (Englisch)

46798

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

1-11

The following contains explanations about features and functions that should be understood when this machine is used as a facsimile.

Switching from the Copy Operation

Mode to the Fax Operation Mode

This machine was fundamentally designed for use as a copy

machine and the default setting is the Copy Operation mode.

Therefore, if you want to send a fax to another party it is first

necessary to switch to the Fax Operation mode.

However, in terms of receiving a fax. since the Automatic Fax

Reception mode is the default setting, fax reception is possible and

the documents will be printed out automatically even when the

machine is in the Copy Operation mode.

When the machine is in the Copy Operation mode, the COPY

indicator will be lit. To switch to the Fax Operation mode, simply

press the Fax key. Once the machine is in the Fax Operation mode,

the Fax indicator will light and the touch panel will change to the

basic fax screen.

What is the “Initial Mode”?

The initial screen that appears in the touch panel when you press

the Fax key and change to the Fax Operation mode, or that

normally appears in the Fax Operation mode after a successful fax

transmission or reception, is called the “basic fax screen”. The

accompanying default settings and related operational status is

known as the “initial mode”.

When the fax machine is in the initial mode for fax operation,

“Ready for fax transmission” will be shown in the message display.

Always check the touch panel to make sure that is it is in the initial

mode and displaying this basic fax screen PRIOR to performing

any facsimile operation.

The fax machine will also return to the initial mode when the Auto

Clear function engages.

(inch)

(metric)

z Message display when Restricted Access is turned ON...

Even if the fax machine is in the initial mode for fax operation, the

message display will differ if Restricted Access is turned ON.

(inch)

(metric)

In this case, it is necessary to enter your ID-code or the registered

administrator number in order to use the fax.

If a viable ID-code or the registered administrator number is

entered, the touch panel will change to the standard initial mode

for fax operation.

NOTE

When Restricted Access is turned ON, it is necessary to

enter the registered administrator number in the

Restricted Access Login Screen in order to access the

various setting and registration procedures of this fax.

Even if a viable ID-code that enables fax operation is

entered, the menus that correspond to the various

management-related setting and registration procedures

of this fax will not be available. (Refer to “Managing Fax

Use by Each Department (Restricted Access)” on page

5-58, and the Operation Guide for your copier.)

Features and Functions of this Fax

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oce OP31C Fax System Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info