Bedienungsanleitung Oceanic OC1 (Seite 19 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

Fly/Dsat, information includes (Fig. 30A/B):

> Time to Fly (hr:min), 0:00 if no dive yet, with graphic FLY

> Time to Desat (hr:min), 0:00 if no dive yet, with graphic DSAT

> Time (clock) icon

• S < 2 sec, revert to Menu

• L (on closure) to activate Backlight

NORM PLAN MODE

No Deco Dive Times (NDLs) in NORM Plan Mode are based on the Algorithm selected (DSAT or PZ+) and only on the FO2 set

for Gas 1. FO2 set for Gas 2 and 3 are not used.

NORM Menu >> Plan Lead-in >> PDPS

Plan Lead-in, information includes (Fig. 31A/B):

> Graphic PLAN

> Graphic FO2_1 (Gas 1)

> Graphic Air or numeric % value (21 to 50), indicating the FO2 set for Gas 1

> Graphic PO2 with PO2 Alarm value set (1.20 to 1.60), if Nitrox, blank if Air

> Nx icon, if Nitrox

• S < 2 sec to access PDPS

• L (on closure) to activate Backlight

PDPS (Pre Dive Planning Sequence)

The PDPS displays Depths and allowable No Deco Dive Times. It will sequence through Depths from 30 to 190 FT (9 to 57 M),

or the Max Depth that will allow theoretical No Deco Dive Time of at least 1 minute based upon the previous dive proﬁles in a

series of repetitive dives and taking into account descent and ascent rates of 60 FPM (18 MPM).

When the Conservative Factor is set On, No Deco Dive times are reduced to the values of the next 3000 foot (915 meter) higher

Altitude. Refer to tables in back.

PDPS, information includes (Fig. 32A/B):

> Max Depth with MAX and FT (or M) icons, if Nitrox, blank if set for Air

> Plan Depth value with graphic FT (or M)

> Graphic NDC (or OTR) with Dive Time allowed (hr:min) with Time (clock) icon, no OTR if Air

> Graphic PO2 with PO2 Alarm value set (1.20 to 1.60), if Nitrox, blank if set for Air

> Nx icon, if Nitrox

• A (hold) to scroll upward through screens at a rate of 8 per second increasing planned Depth from 30 to 190 FT (9 to 57 M)

in increments of 10 FT (3 M)

• A (< 2 sec) to step upward through screens one at a time

• M (< 2 sec) to step back through screens one at a time

• S (< 2 sec) to revert to the Plan Lead-in screen

• L (on closure) to activate Backlight

NORM/GAUG LOG MODE

Information from the latest 24 NORM and/or GAUG dives is stored for viewing. After exceeding 24 dives, the most recent dive

is stored while the oldest is deleted.

> Dives are numbered from 1 to 24 starting each time NORM (or GAUG) Dive Mode is activated. After the post dive 24 hour

period has elapsed, the ﬁrst dive of the next operation period is #1.

> During the ﬁrst 10 minutes after a dive (Transition Period), that dive’s Log screens can be viewed. After 10 minutes, the Log

screens for all dives stored can be viewed.

> In the event that a dive’s elapsed time (EDT) exceeds 9:59 (hr:min), the data at the 9:59 interval is recorded in the Log upon

surfacing of the unit.

NORM Menu >> Log Preview >> Log Data 1 >> Log Data 2

Log Preview, information includes (Fig. 33):

> Log Mode (book) icon

> Graphic NO-D (or DECO or GAUG or VIOL)

> Graphic DIVE and dive number (1 to 24, 0 if no dive yet).

> Time dive began (hr:min) with Time (clock) icon and A (or P), and the graphic ALT if Alternate Time

> Date, the dive was conducted

> Nx icon, if Nitrox

• A (hold) to scroll upward through Preview screens at a rate of 8 per second

• A (< 2 sec) to step upward through screens one at a time

• M (< 2 sec) to step back through screens one at a time

• S (< 2 sec) to access the dive's Log Data 1 screen

• L (on closure) to activate Backlight

Fig. 30A - FLY/SAT

(10 min after dive)

Fig. 30B - FLY/SAT

(< 10 min after dive)

Fig. 31A - PLAN LEAD-IN

(Gas 1 set for Air)

Fig. 31B - PLAN LEAD-IN

(Gas 1 set for Nitrox)

Fig. 32A - PDPS

(nitrogen control)

Fig. 32B - PDPS

(oxygen control)

Fig. 33 - LOG PREVIEW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info