Bedienungsanleitung Oceanic OC1 (Seite 20 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

Log Data 1, information includes (Fig. 34):

> Log Mode (book) icon

> Max Depth** with MAX and FT (or M) icons

> Graphic DSAT (or PZ+), the NDL Basis (algorithm selected)

> Graphic EDT with Dive Time (hr:min)

> Graphic SURF and pre dive SI (hr:min), 0:00 if Dive # 1, 9: - - if > 9:59, with Time (clock) icon

> Temperature (minimum that dive) with ° icon and graphic F (or C)

> TLBG with the max segment ﬂashing, others ﬁxed up to end of dive accumulation. All segments ﬂashing if a Violation.

Blank if GAUG.

> VARI, max Ascent Rate sustained for 4 sec

> Nx icon, if Nitrox

** Max Depth for NORM dives is 330 FT (100 M), and for GAUG dives it is 660 FT (200 M).

• S (< 2 sec) to access the dive's Log Data 2 screen if Nitrox, or revert to the Preview screen if not

• L (on closure) to activate Backlight

Log Data 2 (Nitrox only), information includes (Fig. 35):

> Log Mode (book) icon

> Graphic GAS 1 (or 2 or 3), in use when dive ended

> Graphic FO2 with FO2 Set Point (or graphic Air) for Gas in used when dive ended

> Graphic PO2 with value of Max PO2 achieved

> Nx icon

> O2BG with O2 icon, accumulated when dive ended

• S (< 2 sec) to revert to the Preview screen

• L (on closure) to activate Backlight

SET F (FO2) MENU

S (< 2 sec) - to access Set F Menu while the selection Arrow icon ( > ) is next to Set F on the NORM Menu

A (< 2 sec) - to step down (forward) through selections

M (< 2 sec) - to step up (back) through selections

S (< 2 sec) - to access selection indicated by Arrow icon ( > )

The last setting saved is displayed next to each Menu item.

Refer to page 29 for an overview of FO2 settings and the 50% Default feature.

Set FO2 Gas 1, information includes (Fig. 36A/B):

> Max Depth with MAX and FT (or M) icons, allowed for PO2 Alarm Set, blank if Air

> Graphic GAS1

> Graphic FO2 with FO2 Set Point value, ﬂashing

> Graphic PO2 with alarm value set

> Nx icon, blank if Air

• A (hold) to scroll upward through Set Points at a rate of 8 per second from Air (default) to 21 through 50 (%) in increments

of 1%.

> The scroll will stop when A is released, or pause at 32% if A is held depressed.

> Depress A, or keep it depressed, to resume the scroll from 32 through 50, then stop at Air (or 21%).

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time

• S (< 2 sec) to save the setting and revert to the Set F Menu

Gas 1 is the default gas on the surface prior to a new dive and 10 minutes after surfacing from dives.

Set FO2 Gas 2, information includes (Fig. 37):

> Max Depth with MAX and FT (or M) icons, allowed for PO2 Alarm Set, blank if Air

> Graphic GAS2

> Graphic FO2 with FO2 Set Point value, ﬂashing

> Graphic PO2 with alarm value set

> Nx icon, blank if Air

• A (hold) to scroll upward through Set Points at a rate of 8 per second from Air** to 21 through 100 (%) in increments of

1%.

> The scroll will start at the FO2 Gas 1 Set Point** and stop when A is released, or pause at 50 then again at 80% if A is

held depressed.

> Depress A, or keep it depressed, to resume the scroll up through 100, then stop at the Gas 1 Set Point.

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time

• S (< 2 sec) to save the setting and revert to the Set F Menu

**Gas 2 cannot be set at a value less that set for Gas 1.

Fig. 34 - LOG DATA 1

Fig. 35 - LOG DATA 2























Fig. 36A - SET FO2 GAS 1

Fig. 36B - SET FO2 GAS 1

Fig. 37 - SET FO2 GAS 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info