Bedienungsanleitung Oceanic OC1 (Seite 23 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

Set Units, information includes (Fig. 49):

> Graphic UNITS

> Set Point graphics IMPERIAL and METRIC; Arrow ( > ) icon next to the one previously saved ﬂashing

• A (< 2 sec) to toggle Set Points

• S (< 2 sec) to save the setting and revert to the Set U Menu

Set Deep Stop, information includes (Fig. 50):

> Graphic DEEP STOP

> Set Point graphics ON and OFF; Arrow ( > ) icon next to the one previously saved ﬂashing

• A (< 2 sec) to toggle Set Points

• S (< 2 sec) to save the setting and revert to the Set U Menu

Deep Stop, which applies only to NORM No Deco dives, is described on page 33.

Set Safety Stop, information includes (Fig. 51A):

> Stop Time Set Point graphics OFF, 3 MIN, and 5 MIN; Arrow ( > ) icon next to the one previously saved ﬂashing

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time

• S (< 2 sec) to save the Stop Time setting and display the Set Safety Stop Depth screen

Set Safety Stop Depth, information includes (Fig. 51B):

> Stop Depth Set Point graphics 10 FT, 15 FT, and 20 FT (or 3 M, 4 M, 5 M, and 6 M); Arrow ( > ) icon next to the one

previously saved ﬂashing

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time

• S (< 2 sec) to save the Stop Depth setting and revert to the Set U Menu

Safety Stop, which applies only to NORM No Deco dives, is described on page 34.

Set NDL Basis, information includes (Fig. 52):

> Graphic NDL BASIS

> Set Point graphics PZ+ and DSAT; Arrow ( > ) icon next to the one previously saved ﬂashing

• A (< 2 sec) to toggle Set Points

• S (< 2 sec) to save the setting and revert to the Set U Menu

This feature, which allows selection of the algorithm to be used for nitrogen and oxygen calculations for Plan and DTR values ,

is described on page 29.

Set Conserv, information includes (Fig. 53):

> Graphic CONSERV

> Set Point graphics ON and OFF; Arrow ( > ) icon next to the one previously saved ﬂashing

• A (< 2 sec) to toggle Set Points

• S (< 2 sec) to save the setting and revert to the Set U Menu

When CONSERV (Conservative Factor) is set On, NDLs are reduced to values equivalent to those that would be available at

the next higher 3000 foot (915 meter) Altitude. Refer to the charts on page 63.

Set Glo Dura, information includes (Fig. 54):

> Graphics GLO and DURATION

> Set Point 0 (or 5, 10, 30, 60) ﬂashing with graphic SEC

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time

• S (< 2 sec) to save the setting and revert to the Set U Menu

Glo Dura (Backlight Duration) is the time the backlight will remain On after L is released.

Fig. 49 - SET UNITS

Fig. 50 - SET DEEP STOP

Fig. 51A - SET SAFETY

STOP TIME

Fig. 51B - SET SAFETY

STOP DEPTH

Fig. 52 - SET NDL BASIS

Fig. 53 - SET CONSERVA-

TIVE FACTOR

Fig. 54 - SET BACKLIGHT

DURATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info