Bedienungsanleitung Oceanic OC1 (Seite 25 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

Fig. 59 - SELECT DIVE

MODE

SELECT DIVE MODE

S (< 2 sec) - to access Set Dive Mode while the selection Arrow icon ( > ) is next to it on the NORM Menu

Set Dive Mode, information includes (Fig. 59):

> Graphics SEL and DIVE MODE

> Set Point graphics GAUG and FREE; Arrow ( > ) icon next to GAUG

• A (< 2 sec) to toggle between the selections

• S (< 2 sec) to save the selection and access that mode's Surface Main screen

NORM/GAUG HISTORY MODE

S (< 2 sec) - to access History 1 while the selection Arrow icon ( > ) is next to History on the NORM (or GAUG) Menu

History 1, information includes (Fig. 60):

> Graphic HIST

> Total number dives ever recorded (up to 9999) with graphic DIVES, 0 if no dive yet

> Total hours of EDT (dive time) ever recorded with graphic Hour and Time (clock) icon, 0 if < 1 hour

• S (< 2 sec) to access History 2

History 2, information includes (Fig. 61):

> Max Depth ever (up to 660 FT/200 M) with MAX and FT (or M) icons

> Graphic HIST

> Graphic SEA, or EL2 to EL7, highest Altitude at which a dive was conducted

> Temperature with ° icon and graphic F (or C), lowest recorded during any dive

• S (< 2 sec) to revert to NORM (or GAUG) Menu

SERIAL NUMBER

S (< 2 sec) - to access while the selection Arrow icon ( > ) is next to it on the NORM Menu

Serial Number, information includes (Fig. 62):

> Graphic SN

> OC1's factory programmed SN

> Graphic r1A (or higher), indicating the revision level of the Firmware (OC1's operating software); followed by 01 (or

higher), indicating the revision level of the Display

• S (< 2 sec) to revert to the NORM (or GAUG) Menu

BATTERY/TMT STATUS

S (< 2 sec) - to access while the selection Arrow icon ( > ) is next to it on the NORM (or GAUG) Menu

Access to this selection activates the OC1's Receiver, then after 2 seconds, starts an automatic scroll displaying a sequence of

Status screens >>

> OC1 Battery Status for 3 sec

> TMT 1 Status for 3 sec

> TMT 2 Status for 3 sec

> TMT 3 Status for 3 sec

> revert to NORM (or GAUG) Menu

OC1 Battery Status, information includes (Fig. 63):

> Graphics OC1 and BATT

> Graphic GOOD (=> 2.75 v) or LO (< 2.75 v)

> Battery icon, if LO, ﬂashing (< 2.50 v)

TMT Status, information includes (Fig. 64A):

> Graphics TMT1 (or 2 or 3) and BATT

> Graphic GOOD (if linked and => 2.75 v) or LO (< 2.75 v)

> Tank Pressure with PSI (or BAR) and Link icons, if the TMT is active and reporting

TMT Status (not reporting), information includes (Fig. 64B):

> Graphic TMT1 (or 2 or 3)

> Graphic NOT AVAIL

This screen appears when the OC1's receiver is not receiving a signal from a TMT, or the TMT is set Off.

Fig. 60 - HISTORY 1

Fig. 61 - HISTORY 2

Fig. 62 - SERIAL NUMBER

Fig. 63 - OC1 STATUS

Fig. 64A - TMT STATUS

Fig. 64B - TMT NOT

REPORTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info