Bedienungsanleitung Oceanic OC1 (Seite 56 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

COMPASS OPERATION

Once it is Calibrated, Declination is set, the OP Mode is selected, and the course Heading is set (if Reference), the OC1 is ready

for operation on the surface or underwater.

• S (2 sec) - to access Compass OP Main while viewing a Surface or Dive Main screen (NORM, GAUG, or FREE) or the

Watch Default Time screen

North OP Main, information includes (Fig. 154) -

> Depth with FT (or M) icon, blank on surface

> North Mode icon

> Static Arrow icon, diver direction of travel

> Dynamic Arrow icon, relative direction of magnetic north

> Tilt icon (Fig. 154a), while Compass is tipped to either side (left or right) at an angle > 20°. Correct by moving Compass to

a level position.

> Diver's Heading as 001 to 360° with quadrant graphic.

Value removed when the Tilt icon is on.

• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or Watch Time (whichever one access was from)

Reference OP Main, information includes (Fig. 155) -

> Depth with FT (or M) icon, blank on surface

> Reference Mode icon

> Static Arrow icon, diver direction of travel

> Turn Arrow icon (left or right) ﬂashing, while > 10° deviation from Heading set

> Dynamic Arrow icon, tracking set Reference direction

> Tilt icon, while Compass is tipped to either side (left or right) at an angle > 20°

> Diver's Heading as 001 to 360° with quadrant graphic.

Value removed when the Tilt icon is on.

• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or Watch Time (whichever one access was from)

• A (2 sec) - accesses Auto Home Reference Mode which changes and ﬂashes the Mode icon (Fig. 156), then -

• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or Watch Time (whichever one access was from), with Compass

operation remaining in Reference Mode

• S (< 2 sec) - inverts the Heading, and during dives changes Compass operation to Auto Home.

> On surface operation remains in Reference Mode after return to the Surface or Dive Main, or Watch Time (whichever one

access was from).

Auto Home Main, information includes (Fig. 157) -

> Depth with FT (or M) icon

> Auto Home Mode icon

> Static Arrow icon, diver direction of travel

> Turn Arrow icon (left or right) ﬂashing, while > 10° deviation from Heading

> Dynamic Arrow icon, tracking Home direction

> Tilt icon, while Compass is tipped to either side (left or right) at an angle > 20°

> Diver's Heading as 001 to 360° with quadrant graphic.

Value removed when the Tilt icon is on.

• S (2 sec) or 60 sec - reverts to Dive Main

Fig. 154 - NORTH OP MAIN

(during dive, Tilt)

Fig. 155 - REF OP MAIN

(during dive, Turn Left)

Fig. 156 - REF AUTO HOME

Fig. 157 - REF AUTO HOME

WARNING: You must become thoroughly familiar with setup and operation of the OC1 Digital

Compass before using it as your primary device for navigation. Failure to do so could result in

serious errors relating to activities involving navigation.

> Practice on land before use in water.

> Practice on the surface before use underwater.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info