Bedienungsanleitung Oceanic OC1 (Seite 58 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

UPLOADING SETTINGS AND DOWNLOADING DATA

The Settings Upload portion of the Oceanlog PC Interface program can be used to set/change the OC1’s Main Time, Date, Set A

group (Alarms), and Set U group (Utilities) using the same Interface System. The Set F group (FO2) and FREE Mode Alarms must

be entered using the OC1's button controls.

Information available for retrieval (download) from the OC1 to the Download portion of the program includes dive number, SI,

max depth, EDT, start date/time, lowest temperature, sampling rate, dive proﬁle, OC1's Set Points, pressure, ATR, O2BG, TLBG,

and Gas Switching events/pressures.

Prior to attempting to download data from your OC1 or upload Settings to it, review the Help section of the interface program.

Recommended is to print those sections of Help that you consider appropriate for your Interface activities.

A USB Driver is provided on the Oceanlog CD as part of the Interface System.

The OC1 is conﬁgured with a Data Port located on the side (Fig. 158a) that enables it to be connected to a PC through a USB

port using the special Interface Cable supplied.

To connect the PCI Cable to the OC1:

> position the connector with the red dot at 12 o'clock.

> align the pins of the cable connector with the holes in the data port and press the connector into the port (Fig. 159A).

> turn the connector clockwise until the red dot is at 1 o'clock and it locks in (Fig. 159B), then release it.

The OC1 checks for a connection to the Data Port once every second while the Watch Default Time is displayed. Checks are not

made if the Wet Activation contacts are wet.

When the PC Interface cable is plugged in, the graphic PC COMM is displayed with a 2 minute countdown timer that runs until

the connection is conﬁrmed, then the graphics PC COMM CONNECTED are displayed until completion of the upload or down-

load operation.

PC requirements:

• IBM

, or compatible, Personal Computer with USB Port

• Intel

Pentium 200 MHz or better microprocessor

• Microsoft

Windows

2000, XP, Vista, or 7

• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen area

of display settings

• 16MB of available RAM

• 20MB of available hard drive storage

• Mouse

• CD Rom drive

• Printer

For software updates, refer to the Oceanic web site at -

www.OceanicWorldwide.com

For support, call OceanLog Support toll free at -

(866) 732-7877, 8 Am to 5 Pm USA Paciﬁc time.

Fig. 158 - OC1 DATA PORT

Fig. 159B - PCI CABLE

(turn dot to 1 o'clock)

Fig. 159A - PCI CABLE

(insert with dot at 12 o'clock)

dot

TIMER

(counting down)

PCI CABLE

(connection sensed)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info