Bedienungsanleitung Oceanic OCI (Seite 57 von 76) (Englisch)

551847

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

OCi OPERATING MANUAL

SET SAMPLING RATE (TECH FREE only), information includes (Fig. 143):

> Graphics PC SAMPLE RATE.

> Graphics ON and SET, with ON ﬂ ashing upon access.

There is no OFF setting for this feature.

> Graphic SEC with Time (seconds).

• A or M (< 2 sec) - to toggle between ON and SET.

• S (2 sec) - to step back to the Set Utilities Menu without changing the setting.

• S (< 2 sec) - to save the selection.

> If ON is selected, operation will revert to the Set Utilities Menu.

> If SET is selected, the time digits will ﬂ ash.

• S (2 sec) - to step back to SET ﬂ ashing.

• A (< 2 sec) - to step through the time set points 0.25, 0.50, 1.00, 2.00 (seconds) one at a time.

• M (< 2 sec) - to step back through the set points one at a time.

• S (< 2 sec) - to save the setting and ﬂ ash the graphic SET allowing ON to be selected/saved.

SET DSD (DIVE START DEPTH), information includes (Fig. 144):

> Depth with FT (or M) icon.

> Graphics DIVE START DEPTH and DSD.

> Graphics ON and SET, with ON ﬂ ashing upon access.

There is no OFF setting for this feature.

• A or M (< 2 sec) - to toggle between ON and SET.

• S (2 sec) - to step back to the Set Utilities Menu.

• S (< 2 sec) - to save the selection.

> If ON is selected, operation will revert to the Set Utilities Menu.

> If SET is selected, the Depth digits will ﬂ ash.

• S (2 sec) - to step back to SET ﬂ ashing.

• A (< 2 sec) to step upward through the set points of 2, 4, 6 FT (0.6, 1.2, 1.8 M) one at a time.

• M (< 2 sec) to step back through set points one at a time.

• S (< 2 sec) - to save the setting and ﬂ ash the graphic SET allowing ON to be selected/saved.

SET BDSI (BETWEEN DIVE SURFACE INTERVAL), information includes (Fig. 145):

> Graphics DIVE SURF INTVL and BDSI.

> Time (min:sec) with SURF icon.

> Graphics ON and SET; with ON ﬂ ashing upon access.

• A or M (< 2 sec) - to toggle between ON and SET.

• S (2 sec) - to step back to the Set Utilities Menu.

• S (< 2 sec) - to save the selection.

> If ON is selected, operation will revert to the Set Utilities Menu.

> If SET is selected, the Time digits will ﬂ ash.

• S (2 sec) - to step back to SET ﬂ ashing.

• A (hold) to scroll upward through the set points 8/sec from 0:01 to 1:00 (min:sec) in increments of :01 (1 second).

• A (< 2 sec) to step upward through the set points one at a time.

• M (< 2 sec) to step back through set points one at a time.

• S (< 2 sec) - to save the setting and ﬂ ash the graphic SET allowing ON to be selected/saved.

-----------------------------------------------------------------------------------------------------------

SELECT OP (OPERATING) MODE, same as NORM/GAUG - refer to page 26.

OCi ID (SERIAL NUMBER), same as NORM/GAUG - refer to page 27.

---------------------------------------------------------------------------------------------------------

Upon descent to the DSD (Dive Start Depth) set for 5 seconds, operation will enter Dive Mode.

Fig. 144 - SET DSD

Fig. 145 - SET BDSI

Fig. 143 - SET SAMPLING

(TECH FREE only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OCI Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OCI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info