Bedienungsanleitung OK ODL 39650H-TB (Seite 19 von 52) (Deutsch, Englisch, Französisch, Italienisch)

783159

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

English - 33 -

To terminate this operation and control the TV via

the remote again, press Quick Menu button on the

remote, highlight the CEC RC Passthrough and

set as Off by pressing Left or Right button. This

feature can also be enabled or disabled under the

System>Settings>More menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio from

connected audio device only (same as other optical or

co-axial digital audio outputs). If you want to change

connected device’s volume level, you should select

that device from the source list. In that case volume

control keys are directed to connected audio device.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

$OORZVDQ$XGLR$PSOL¿HU5HFHLYHU WREHXVHG ZLWK

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the System>Settings>More

menu as $PSOL¿HU. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

English - 34 -

TV Menu Contents

System - Picture Menu Contents

Mode You can change the picture mode to suit your preference or requirements. Picture mode can be

set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Contrast Adjusts the light and dark values on the screen.

Brightness Adjusts the brightness values on the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour Sets the colour value, adjusting the colors.

Energy Saving For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen

Off or Off.

Note: Available options may differ depending on the selected Mode.

Backlight This setting controls the backlight level. The backlight function will be inactive if the Energy

Saving is set to an option other then Custom.

Advanced Settings

Dynamic Contrast You can change the dynamic contrast ratio to desired value.

Noise Reduction If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the

amount of noise.

Colour Temp Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are

available.

White Point If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom Sets the desired image size format.

Film Mode Films are recorded at a different number of frames per second to normal television programmes.

7XUQWKLVIHDWXUHRQZKHQ\RXDUHZDWFKLQJ¿OPVWRVHHWKHIDVWPRWLRQVFHQHVFOHDUO\

Skin Tone Skin tone can be changed between -5 and 5.

Colour Shift Adjust the desired colour tone.

RGB Gain (Optional) <RXFDQFRQ¿JXUHWKHFRORXUWHPSHUDWXUHYDOXHVXVLQJWKHRGB Gain feature.

HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this feature to

enhance blackness in the picture.

PC Position Appears only when the input source is set to VGA/PC.

Autoposition Automatically optimizes the display. Press OK to optimize.

H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture on the

screen. You can use phase to get a clearer picture by trial and error.

Reset Resets the picture settings to factory default settings (except Game Mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings

while in PC mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK ODL 39650H-TB Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info