Bedienungsanleitung OK OPR100 (Seite 6 von 33) (Deutsch, Englisch, Holländisch, Französisch)

674953

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Remote control

Remote control buttons

CAUTION

1 Improper installation of batteries can result in leaks and corrosion to the battery and damage to the device.

Corrosion, oxidation, battery leaks and other gradual defects will invalidate the warranty.

1 If you do not use the appliance for an extended period, remove the batteries.

1 Do not put the appliance near a heat source. This could damage the appliance.

1 Put the appliance on a horizontal at surface.

1 Keep minimum (50 mm) space around the appliance for optimal ventilation.

Remarks

5 If this appliance is equipped with rubber feet to prevent it from moving: The feet are made from non-migrating

material specially formulated to avoid leaving any marks or stains on furniture. However, certain types of furniture

polishes, wood preservatives or cleaning sprays cause the rubber to soften and leave marks or a residue on

the furniture, and potentially risk the surface to become damaged. To prevent damage to wooden surfaces, we

recommend that you apply self-adhesive pads to the bottom of the rubber feet before installation.

5 We recommend that you retain the original carton and packaging materials in case it ever becomes necessary

to return your product for service. This is the only way to safely protect the product against damage in transit.

If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the

environment.

3. PREPARATIONS FOR USE

3.1 Unpacking

• Unpack the appliance carefully.

• Check the package contents as described below. If any item is missing, please contact your reseller.

5 We recommend that you retain the original carton and packaging materials in case it ever becomes necessary

to return your product for service. This is the only way to safely protect the product against damage in transit.

If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the

environment.

3.2 Package contents

5 If any item is missing, please contact your reseller.

The following items are included in the received package:

• 1x Mini Projector

• 1x Remote control

• 1x Mains cable

• 1x AV video cable

4. FUNCTIONS

Mini Projector

Main components

22. VOLUME DOWN button

23. BACK button

24. MENU button

25. LEFT arrow button

26. OK button

27. PREVIOUS button

28. ON/OFF button

29. PLAY/PAUSE button

30. MUTE button

31. NEXT button

32. UP arrow button

33. RIGHT arrow button

34. DOWN arrow button

35. INPUT button

36. VOLUME UP button

5. INSTALLATION

5.1 Picture size and projection distance

The following picture sizes can be achieved with the following projection distances (distance between the projector and

the wall):

• 91.7 inch: 64 inch (2.33 m: 163 cm)

• 96.9 inch: 70 inch (2.46 m: 178 cm)

• 108.7 inch: 80 inch (2.76 m: 203 cm)

• 123.2 inch: 90 inch (3.13 m: 229 cm)

• 135.0 inch: 100 inch (3.43 m: 254 cm)

• 161.8 inch: 120 inch (4.11 m: 305 cm)

5.2 Positioning and adjustment

• Place the projector on a solid, horizontal surface.

• Direct the projector onto a white wall using the lens. Bear in mind the distance required to the wall in relation to the

picture size that you wish to achieve, see the previous paragraph.

• Connect the plug on the mains cable to the power input (1) on the projector.

• Connect the mains plug to a wall socket.

• Remove the lens cap (20).

• Switch the projector on with the ON/OFF button (5). The projector will warm up and project the menu onto the wall.

• Turn the adjusting screw (21) on the base of the projector to increase or decrease the tilt angle.

• Use the focus ring (3) to adjust the sharpness of the picture.

• Use the keystone correction ring (2) to correct the picture if it takes on a vertical trapezium shape.

5.3 Connecting a playback device

HDMI connection

• Use an HDMI cable to connect the HDMI output of a device (e.g. a computer, DVD player or media player) to the

HDMI input on the projector (14).

VGA connection

• Use a VGA cable to connect the VGA output of a computer or laptop to the VGA input on the projector (13).

AV video connection

• Use the supplied AV video cable to connect the AV video output of a video device to the AV video input on the

projector (18).

5.4 Connecting headphones or speakers

• Use an audio cable with a 3.5 mm jack to connect headphones or speakers to the audio output (19) of the projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OPR100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von OK OPR100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info