Bedienungsanleitung OK OPR100 (Seite 7 von 33) (Deutsch, Englisch, Holländisch, Französisch)

674953

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

5.5 Placing the batteries in the remote control

1 Improper installation of batteries can result in leaks and corrosion to the battery and damage to the device.

Corrosion, oxidation, battery leaks and other gradual defects will invalidate the warranty.

Remove the battery cover.

Insert the AAA batteries matching the (+) and (-) polarity markings.

Re-install the battery cover.

5.6 Charging a mobile device

Use a USB cable to charge a mobile device via the USB 5 V output (15) on the projector.

6. OPERATION

Switch the projector on with the ON/OFF button (5)(28).

6.1 The main menu

The main menu has four folders: Movie, Music, Photo and Text. The current input source is indicated at the top left. The

folders can be navigated as follows:

• To select a folder, use the arrow buttons on the remote control or the LEFT (10) and RIGHT (7) arrow buttons on the

projector.

• To open the folder, press the OK button (26) on the remote control or the UP arrow button (6) on the projector.

• Or, to go back a step, press the BACK button (23) on the remote control or the DOWN arrow button (9) on the

projector.

6.2 Selecting an input source

• Go to the main menu.

• Press the INPUT button (35) on the remote control or the INPUT/OK/PLAY/PAUSE button (11) on the projector.

• Select the desired input source (AV, VGA, HDMI, USB, SD) with the UP (6) (32) and DOWN (9)(34) arrow buttons.

• Conrm with the OK button (26) on the remote control or the RIGHT arrow button (7) on the projector.

5 NO SIGNAL will appear at the top left if no input source could be found. Check the input source and cables.

6.3 Opening or playing a multimedia le

• Insert a USB storage device or Micro SD card containing the multimedia le into the appropriate input (17)(16).

• Go to the main menu.

• Check at the top left of the screen to verify that the correct input source has been selected. If not, select the correct

input source (USB or SD).

• Choose from Movie, Music, Photo or Text.

• Select the folder containing the multimedia le and press the OK button (26) on the remote control or the UP arrow

button (6) on the projector.

• Select the multimedia le. A preview and properties of the selected le will appear after a few seconds.

• To play the le, press the PLAY/PAUSE button (29) on the remote control or the INPUT/OK/PLAY/PAUSE button (11)

on the projector.

• If you have played this le previously, you will be asked "Memory Play: Yes/No?". To continue playback from where

you paused it, select Yes and press the OK button (26) on the remote control or the UP arrow button (6) on the

projector. To start playback from the beginning, select No and press the OK button (26) on the remote control or the

UP arrow button (6) on the projector.

6.4 During playback

• To mute the sound, press the MUTE button (30) on the remote control. Press the button again to unmute the sound.

• To lower the volume, press the VOLUME DOWN button (22) on the remote control or the LEFT button (25) (10) on

the projector.

• To increase the volume, press the VOLUME UP button (36) on the remote control or the RIGHT button (33) (7) on the

projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OPR100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von OK OPR100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info