Bedienungsanleitung Oki C822n (Seite 103 von 124) (Englisch)

536474

103

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

- 103 -

Setting IP Address

5. Network Settings

Checking the IP address of the printer

Check the current IP address of the printer.

The current IP address of the printer is displayed in the conguration information of the network

(Network Information). Print out the conguration information of the network (Network Information),

and check the IP address of the printer.

Setting the IP address of the printer

Set the IP address of the printer according to the network environment.

(1) Use the default IP address setting.

● When there is a DHCP/BOOTP server, etc. in the network:

The [IP ADDRESS SET] setting of the printer is set to [AUTO] as the factory default. If there is a

DHCP/BOOTP server, etc. in the network, the IP address is automatically obtained from the server

when the printer is connected to the network and turned on.

IP address setting is not required if the settings of the computer and printer are as follows:

- The computer and printer have a same network address in their IP addresses.

- The computer and printer have different host IDs in their IP addresses.

- The computer and printer use the same settings for the subnet mask and gateway.

● When there is no DHCP/BOOTP server, etc. in the network and all the computers connected to the

network are Windows XP:

The [IP ADDRESS SET] setting of the printer is set to [AUTO] as the factory default. When [AUTO]

is selected to the setting, the function of the address resolution without using a server is available. In

this case, even if there is no DHCP/BOOTP server, etc. in the network, the IP address is automatically

set by communicating with Windows XP.

IP address setting is not required if the settings of the computer and printer are as follows:

- The computer and printer have a same network address in their IP addresses.

- The computer and printer have different host IDs in their IP addresses.

- The computer and printer use the same settings for the subnet mask and gateway.

● When there is no DHCP/BOOTP server, etc. in the network, all the computers connected to the

network are Macintosh, and no web browser or Setup Utility will be used:

For the connection with a Macintosh through a network, EtherTalk protocol is used. In this case, IP

address setting is not required.

(2) Set the IP address manually.

● When the case (1) does not apply to your network environment, for example, when there is no

DHCP/BOOTP server, etc. in the network and computers connected to the network have different

system congurations, or when an IP address specied by the network administrator of the company

is required, set the specied IP address to the printer manually. The IP address can be set by using

the control panel of the printer, etc.

Structure of IP Address Setting (Reference Information)

The following is the structure of functions for the IP address setting.

IP address Automatically obtaining DHCP/BOOTP

Address resolution without using a server

Manually setting up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C822n Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C822n

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info