Bedienungsanleitung Oki C822n (Seite 104 von 124) (Englisch)

536474

104

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

- 104 -

Changing Network Settings From the Web Page

5. Network Settings

 Changing Network Settings From the Web Page

This section explains how to change the network settings from the printer’s web page.

To access the printer’s web page, your computer must meet the following conditions.

● TCP/IP must be enabled.

● Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed.

Memo

● Ensure that the security setting of the web browser is set to a medium level.

● To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is

“aaaaaa”.

Reference

● Some of the following settings can be performed on other utilities. For details, refer to “Network Setting Items” P.76.

Informing the End of Consumable Life

and Errors by E-mail (E-mail Alert)

You can set the printer to send an error

notication e-mail when an error occurs. You can

set when to be notied:

● On a periodical basis

● Only when an error occurs

Conguring Your Printer

You can congure the settings for e-mail alert

using the web page.

Memo

● When you specify a domain name in [SMTP Server],

congure the DNS server in the [TCP/IP] setting.

● You need to set the mail server to allow the printer to

send E-mail. For details on the mail server setting, ask to

your network administrator.

● If you use Internet Explorer 7, be sure to congure

the settings below before you send a test mail. In the

browser, select [Tools] > [Internet Options], then

click [Custom Level] on the [Security] tab. Then

select [Enable] in [Allow websites to prompt for

information using scripted windows].

1 Access the printer’s web page and log in

as the administrator.

2 Select [Admin Setup].

3 Select [Network Setup]>[Email]>

[Send Settings].

4 Follow the on-screen instructions to

specify detailed settings.

5 Select [Set detail of the SMTP

Protocol].

6 If necessary, you can congure

[Security settings], [Congure

attached information], and [Others].

7 Click [Submit].

The network card reboots to enable the new

settings.

Periodic Alerts

1 Access the printer’s web page and log in

as the administrator.

2 Select [Admin Setup].

3 Select [Network Setup]>[Email]>

[Alert Settings].

4 Enter an e-mail address to receive the

alerts.

5 Click [Setting] for the specied address.

[Copy] is useful when you want to apply the alert

conditions to another address.

6 Follow the on-screen instructions to

specify detailed settings.

7 Click [OK].

8 Click [View a Summary of Current

Conguration] to check the current

settings, and then click [X] to close the

window.

You can also check the current settings of up to

two addresses on the main window. Select the

desired addresses to check from the list box.

9 Click [Submit].

The network card reboots to enable the new

settings.

Memo

● Alert e-mail will not be sent if errors to notify about have

not occurred.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C822n Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C822n

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info