665206
99
Zoom out
Zoom in
Vorherige Seite
1/139
Nächste Seite
- 99 -
Other Issues
3
3. Troubleshooting
Symptom Point to check Remedy Reference
The paper twists
around the rollers
in the fuser unit.
The settings of media weight and
type are incorrect.
Press the scroll button
or
and then select [Menus] >
[Tray Conguration] > [(tray
name) Cong] > [Media Type]/
[Media Weight]. Then, specify the
appropriate values.
Or, specify a heavier weight in
[Media Weight].
page 48
The paper is light. Use heavier paper. -
There is an image or text on the
leading edge of the paper.
Add a margin on the leading edge of
the paper.
For duplex printing, leave a margin
in the leading and bottom edges.
-
Machine Issues
Symptom Point to check Remedy Reference
You turned on the
printer, but nothing
displays on the
screen.
The AC cord is unplugged. Turn off the printer and then plug in
the AC cord rmly.
-
The power is out. Check if the power is being supplied
to the electric outlet.
-
The printer does
not operate.
The AC cord is not rmly plugged in. Plug in the AC cord rmly. -
The printer is turned off. Turn on the printer. page 21
The printer turned off automatically
by the auto power off function.
Disable the auto power off function. page 69
Printer does not answer. Hold down the power switch for more
than 5 seconds to turn off the printer
forcibly.
-
The printer does
not start printing.
An error is displayed on the panel. Check the error code and follow the
on-screen instructions.
page 87
The Ethernet or USB cable is
unplugged.
Plug in the Ethernet or USB cable
rmly.
page 32,
page 42
Something is wrong with the
Ethernet or USB cable.
Use another Ethernet or USB cable. -
The printer does not support your
Ethernet or USB cable.
Use a USB 2.0 compatible cable.
Use an Ethernet 10BASE-T/
100BASE-TX/1000BASE-TX
compatible cable.
-
Something may be wrong with the
printing function.
Press the scroll button
or and
select [Print Information] >
[Conguration] and then print the
contents of the settings to check the
printing function.
page 30
The interface is disabled. Press the scroll button
or and
select [Admin Setup] > [Network
Setup] and enable the interface you
are using.
-
The printer driver of the printer is
not selected.
Set the printer driver of the printer
as the default printer.
-
The specied port of the printer
driver is wrong.
Specify the port the Ethernet or USB
cable is connected to.
-
The display screen
is blank.
The printer is in the deep sleep
mode.
Check if the <POWER SAVE>
button lights up and press the
<POWER SAVE> button to activate
the printer.
page 22
Print data is not
transmitted to the
printer.
The Ethernet or USB cable is broken. Connect a new cable. -
The time-out period set on the
computer has passed.
Set a longer time-out period. -
99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki C823dn wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki C823dn

Oki C823dn Bedienungsanleitung - Deutsch - 151 seiten

Oki C823dn Bedienungsanleitung - Holländisch - 148 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info