665206
100
Zoom out
Zoom in
Vorherige Seite
1/139
Nächste Seite
- 100 -
Other Issues
3
3. Troubleshooting
Symptom Point to check Remedy Reference
There is an
abnormal sound.
The printer is tilted. Place the printer on a at surface. -
There is a piece of paper or foreign
object inside the printer.
Check the inside of the printer and
remove any objects.
-
The output tray is open. Close the output tray. -
There is a buzzing
sound.
The printer is printing on the heavy
or thin paper when the temperature
inside is high.
This is not a malfunction. You can
proceed with the operation.
-
It takes a while to
start printing.
The printer may be cleaning the
image drum.
Wait for a while. -
The printer is adjusting the
temperature of the fuser unit.
Wait for a while. -
The printer is processing data from
another interface.
Wait until the process nishes. -
A print job has
stopped in the
middle of the
printing process.
As a result of processing print jobs
continuously for a long time, the
inside the printer has become hot.
The printer is cooling off.
Wait for a while.
When the fuser unit becomes cooler,
printing restarts automatically.
-
As a result of processing print jobs
continuously for a long time, the
temperature in the printer inside
has become too high. The printer is
cooling off.
Wait for a while.
When the printer becomes cooler,
printing restarts automatically.
-
When the print processing is
overloaded by printing with the WSD
port, a computer may stop sending.
Retry to send data on a computer. If
the error is not resolved, use other
network port.
-
Memory is
insufcient.
A printer is short on memory
because print data is too large.
Reduce print data with a printer
driver.
Advanced
It takes a long time
to nish printing.
The processing speed of the
computer may be slowing down the
print job.
Use a computer with faster
processing speed.
-
You have selected [Fine / Detail
(1200x1200)] or [ProQ/High
Quality] on the [Job Options] tab
of the printer driver.
Select [Normal (600x600)] on the
[Job Options] tab of the printer
driver.
-
The print data is complex. Make the data simpler. -
Paper is narrow (less than 230 mm). Change the mode. Advanced
The printer driver
is not correctly
displayed on Mac
OS X.
The printer driver may not be
operating correctly.
Uninstall the printer driver and install
it again.
Advanced
Paper is curled. Thin paper is used. Set an appropriate paper weight or
select [High Humid Mode].
Advanced
Paper is wet on the
edge.
Wet paper is used. Select [High Humid Mode]. Advanced
The LED indicator
in the power switch
is blinking at high
speed per about
0.3 seconds.
The printer may be malfunctioning.
Unplug the AC cord immediately.
-
100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki C823dn wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki C823dn

Oki C823dn Bedienungsanleitung - Deutsch - 151 seiten

Oki C823dn Bedienungsanleitung - Holländisch - 148 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info