Bedienungsanleitung Oki ES4161 (Seite 156 von 182) (Englisch)

492990

156

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Changing Network Settings From the Web Page

- 156 -

 Changing Network Settings From the Web Page

This section explains how to change the network settings from the machine's web page.

To access the machine's web page, your computer must meet the following conditions:

 TCP/IP is enabled.

 Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed.

Memo

 Ensure that the security setting of the web browser is set to a middle level, or that cookies are allowed.

 To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is

"aaaaaa".

Reference

 Some of the following settings can be performed on other utilities. For details, refer to "Network Setting Items" P. 133.

Encrypting Communication by

SSL/TLS

You can encrypt communication between your

computer and the machine. Communication is

encrypted by SSL/TLS in the following cases:

 Change of the machine settings from the web page

 IPP printing

 Direct print

 LDAP search

 Send data via SMTP or FTP

 Print received data via SMTP or FTP

Creating a Certificate

You can create a certificate on the web page. The

following two certificates are available:

 A self-signed certificate.

 A certificate created by a certificate authority.

Note

 If you change the machine IP address after you create a

certificate, the certificate becomes invalid. Be sure not to

change the machine's IP address after creating a

certificate.

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager] >

[Security] > [Encryption (SSL/TLS)].

4 Follow the on-screen instructions to

specify detailed settings.

Memo

 The machine's IP address is set to [Common Name].

5 Click [Send].

6 Check the settings and click [OK].

7 If you are creating a self-signed

certificate, follow the on-screen

instructions and close the web page.

Then go to "Enabling Encryption".

If you are getting a certificate issued by

a certificate authority, go to step 8.

8 Follow the on-screen instructions to send

a CSR to a certificate authority.

9 Click [OK].

10 Follow the on-screen instructions to

install a certificate from the certificate

authority.

11 Click [Send].

12 Go to "Enabling Encryption".

Enabling Encryption

After creating a certificate, perform the following

procedure to enable encryption.

When you change the settings from the web

page to enable encryption, communication is

encrypted immediately after that change has

been made.

1 Perform "Creating a Certificate" steps 1

to 3 to enter the encryption screen.

2 Select [Enable] for the desired protocol

on which encryption is applied.

3 Click [Encryption Strength Settings].

4 Select the encryption strength and click

[OK].

5 Click [Send].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 156

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info