Bedienungsanleitung Oki ES4161 (Seite 163 von 182) (Englisch)

492990

163

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Changing Network Settings From the Web Page

- 163 -

Network Settings

8 Select [Authenticate Server] and then

click [Import].

9 Enter the file name of the CA certificate

and then click [OK].

Specify the certificate issued by the certificate

authority, which is the certificate authority from

which the RADIUS server obtained the certificate.

A PEM, DER, and PKCS#7 file can be imported.

10 Click [Send].

The network card reboots to enable the new

settings.

11 When the standby screen appears on the

machine, hold down the power switch for

about a second to turn off the power.

12 Go to "Connecting Your Machine to

Authentication Switch" P. 163.

 Using EAP-TLS

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>

[IEEE802.1X].

4 Select [Enable] for [IEEE802.1X].

5 Select [EAP-TLS] for [EAP Type].

6 Enter a user name in [EAP User].

7 Select [Do not use SSL/TLS

Certificate for EAP authentication]

and then click [Import].

8 Enter the file name of the certificate.

Only a PKCS#12 file can be imported.

9 Enter the password of the certificate and

then click [OK].

10 Select [Authenticate Server] and then

click [Import].

11 Enter the file name of the CA certificate

and then click [OK].

Specify the certificate issued by the certificate

authority, which is the certificate authority from

which the RADIUS server obtained the certificate.

A PEM, DER, and PKCS#7 file can be imported.

12 Click [Send].

The network card reboots to enable the new

settings.

13 When the standby screen appears on the

machine, hold down the power switch for

about a second to turn off the power.

14 Go to "Connecting Your Machine to

Authentication Switch" P. 163.

Connecting Your Machine to

Authentication Switch

1 Make sure that the machine is turned off.

2 Connect an Ethernet cable to the

network interface port.

3 Connect the Ethernet cable to the

authentication port of an authentication

switch.

4 Hold down the power switch for about a

second to turn on the power.

5 Set up the machine.

Reference

 For details on the initial setup, refer to the User's

Manual Basic.

Configuring LDAP Server

Reference

 For details on the LDAP server and encryption setting,

refer to your network administrator.

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>[LDAP

Server Setting].

4 Enter the domain name or IP address of

the LDAP server in [LDAP Server].

5 Enter the port number of the LDAP

server in [Port Number].

6 Specify a value of time-out to wait for

the search results in [Timeout].

7 Specify a value for the maximum number

of entries into the search results in

[Max. Entries].

8 Specify a BaseDN to access the LDAP

server in [DN Name].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 163

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info