Bedienungsanleitung Oki ES4161 (Seite 161 von 182) (Englisch)

492990

161

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Changing Network Settings From the Web Page

- 161 -

Network Settings

 You need to set the mail server to allow the machine to

send an e-mail. For details on the mail server setting, refer

to your network administrator.

 If you use Internet Explorer 7, be sure to configure the

settings below before you send a test mail. In the browser,

select [Tools] > [Internet Options], then click [Custom

Level] on the [Security] tab. Then select [Enable] in

[Allow websites to prompt for information using

scripted windows].

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>[E-mail]>

[Send Settings].

4 Follow the on-screen instructions to

specify detailed settings.

5 Select [Set detail of the SMTP

Protocol].

6 If necessary, you can configure

[Security Settings], [Configure

attached information], and [Others].

7 Click [Send].

The network card reboots to enable the new

settings.

Regular Alert

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>[E-mail]>

[Alert Settings].

4 Enter an e-mail address to receive the

alerts.

5 Click [Setting] for the specified address.

[Copy] is useful when you want to apply the alert

conditions to another address..

6 Follow the on-screen instructions to

specify detailed settings.

7 Click [OK].

8 Click [View a summary of current

configuration] to check the current

settings, and then click [X] to close the

window.

You can also check the current settings of up to

two addresses on the main window. Select the

desired addresses to check from the list box.

9 Click [Send].

The network card reboots to enable the new

settings.

Memo

 If there is no error specified, the alert e-mail is not sent.

Alert At Time of Error Occurrence

1 Perform steps 1 to 6 in "Regular Alert".

When an error or warning is selected to require

notification, a window will display to specify the

time between error occurrence and sending the

alert.

2 Specify the time to sending of an error

alert and then click [OK].

If you specify a longer time, you are only notified

of persisting errors.

3 Click [OK].

4 Click [View a summary of current

configuration] to check the current

settings, and then click [X] to close the

window.

You can also check the current settings of up to

two addresses on the main window. Select the

desired addresses to check from the list box.

5 Click [Send].

The network card reboots to enable the new

settings.

Using SNMPv3

When you use the SNMP manager that supports

SNMPv3, the management of the machine is

encrypted by SNMP.

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>[SNMP]>

[Setting].

4 Follow the on-screen instructions to

specify detailed settings.

5 Click [Send].

The network card reboots to enable the new

settings.

Memo

 Your machine has an SNMP agent. You can confirm and

change the machine settings by a commercially available

SNMP agent. For the MIB of the machine, refer to the

software DVD-ROM and check the "README" file in the

[Misc] > [MIB] folder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 161

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info