Bedienungsanleitung Oki ES4161 (Seite 160 von 182) (Englisch)

492990

160

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Changing Network Settings From the Web Page

- 160 -

47 Click [Finish].

48 On the IP security policy properties

window, click [OK].

49 On the [Local Security Policy] window,

select the new IP security policy.

50 From the [Action] menu, select

[Assign].

51 Check that for the new IP security policy,

[Policy Assigned] is displayed as

[Yes].

52 Click [X] on the [Local Security Policy]

screen.

Controlling Access Using IP

Address (IP Filtering)

You can control access to the machine using the

IP address. You can set whether to allow

configuration or printing from the IP addresses

specified. By factory default, IP filtering is

disabled.

Note

 Be sure to specify the correct IP address. If you specify a

wrong IP address, you cannot access the machine using

the IP protocol.

 When you enable IP filtering, the access to and from a host

that is not specified in these steps is rejected.

Memo

 You can use only IPv4 for IP filtering.

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>

[Security]>[IP Filtering].

4 Follow the on-screen instructions to

specify detailed settings.

Note

 If nothing is registered in[Administrator's IP

Address to Register], you may not be able to access

the machine depending on the specified IP address

range.

 If you use a proxy server, [Your Current Local

Host/Proxy IP Address] and the IP address of your

host may not match.

5 Click [Send].

The network card reboots to enable the new

settings.

Control Access Using MAC

Address (MAC Address

Filtering)

You can control access to the machine using the

MAC address. You can allow or reject the access

from the specified MAC addresses.

Note

 Be sure to specify the correct MAC address. If you specify

the wrong MAC address, you cannot access the machine

via a network.

Memo

 You cannot specify to accept or to reject for each address

individually.

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>

[Security]>[MAC Address Filtering].

4 Follow the on-screen instructions to

specify detailed settings.

Note

 If nothing is registered in [Administrator's MAC

Address to Register], you may not be able to access

the machine depending on the specified MAC address.

 If you use a proxy server, [Your Current Local

Host/Proxy MAC Address] and the MAC address of

your host may not match.

5 Click [Send].

The network card reboots to enable the new

settings.

Error Notification by E-mail

(E-mail Alert)

You can set the machine to send an error

notification e-mail when an error occurs. You can

set when to be notified:

 On a periodical basis

 Only when an error occurs

Configuring Your Machine

You can configure the settings for e-mail alert

using the web page.

Memo

 If you have configured the settings for Scan To Mail / Scan

To Internet Fax that are described in the "User's Manual

Basic", the server configuration is complete.

 When you specify a domain name in [SMTP Server],

configure the DNS server in the [TCP/IP] setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info