Bedienungsanleitung Oki MB290 (Seite 41 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 36 -

6 - Parameters/Setup

confirm with OK.

3 Enter again your lock code (4 digits) with the

keyboard, confirm with OK.

4 Quit this menu by pressing the button.

To access the Fax server settings locking menu:

8332- ADVANCED FCT / FAX SERVER / LOCK /

LOCK ACCESS

1 Press , enter 8332 using the keypad.

2 Enter the four-digit locking code with the keypad.

3 Press OK to confirm.

4 With the buttons  or , choose ON and confirm

with OK.

5 Quit this menu by pressing the button.

Adjust to page

This menu allows you to print out received faxes

automatically adjusting them to the page format.

Received faxes are then automatically reduced or

enlarged to fit the page format which is used on the

machine.

To turn adjust to page mode on:

245 - SETUP / RECEPTION / ADJUST PAGE

1 Press , enter 245 using the keypad.

2 Select the option ON or OFF and confirm with OK.

3 To exit this menu, press .

Received faxes reduction mode

This menu allows you to reduce received faxes for

printing. This adjustment can be automatic or manual.

Automatic mode:

This mode automatically resizes received faxes.

To set automatic mode:

246 - SETUP / RECEPTION / REDUCTION

1 Press , enter 246 using the keypad.

2 Select AUTOMATIC and confirm with OK.

3 To exit this menu, press .

Manual mode:

The machine proposes a 70 to 100 % reduction. Outside

these values, the machine beeps for error. This fixed

reduction will be used when printing received documents,

regardless of the used paper format.

To set the manual mode:

246 - SETUP / RECEPTION / REDUCTION

1 Press , enter 246 using the keypad.

2 Select FIXED and confirm with OK.

3 Enter the reduction value (between 70 and 100)

and confirm with OK.

4 To exit this menu, press .

Technical Parameters

As delivered your machine is preset by default. However,

you may adjust it to meet your requirements by resetting

the technical parameters.

To set the technical parameters:

29 - SETUP / TECHNICALS

1 Press , enter 29 using the keypad.

2 Select the desired parameter and confirm with OK.

3 With the keys  or , modify the parameter

settings by following the table below and press OK.

Important

If a code is already registered, enter

the old code before typing the new

one.

Parameter Signification

1 - Scanning mode

Default value of the scan mode

resolution for the documents to be

transmitted.

2 - TX header

Important: this parameter is by

default activated on the US model

and cannot be modified.

If this parameter is on, your header

will appear on all documents sent

to your subscribers with your

name, number, date and number

of pages.

Warning: If you send a fax from

the document loader, the

transmission header will not

appear on the document your

correspondent receives.

3 - TX speed

Transmission speed for outgoing

documents.

For a quality telephone line

(compatible, no echo),

communications occur at

maximum speed.

However, it may be necessary to

restrict the transmission speed for

some calls.

4 - Echo protect

If this parameter is on, the on-line

echo will be reduced during long

distance calls.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info