Bedienungsanleitung Oki MB290 (Seite 42 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 37 -

6 - Parameters/Setup

6 - EPT mode

For some long distance calls

(satellite), the on-line echo may

disturb the call.

7 - COM. display

Choice between transmission

speed displayed or number of the

page in progress.

8 - Eco energy

Choosing the printer standby

delay: the printer will switch to

standby after a delay (in minutes)

of NON-operation or during the

period of time of your choice.

Note: you can also access this

parameter by pressing the

key from the idle screen.

10 - RX header

If this parameter is on, all

documents received by your fax

will include the subscriber’s header

with his/her name, number (if

available) fax print date and the

page number.

11 - RX speed

Transmission speed for incoming

documents.

For a quality telephone line

(compatible, no echo),

communications occur at

maximum speed.

However, it may be necessary to

restrict the transmission speed for

some calls.

12 - Rings

Number of rings to automatically

start your machine.

13 - Discard size

The Discard Size parameter only

defines the printing of received

faxes. The number of lines of a

document can be too high for the

printing paper format. This

parameter defines the threshold

beyond which the extra lines are

printed on a second page. Below

this threshold, extras lines are

deleted.

If you choose ON, the threshold is

set on 3 centimeters.

If you choose OFF, the threshold is

set on 1 centimeter.

20 - E.C.M.

This parameter helps correct the

calls made on disturbed telephone

lines. It is used when the lines are

weak or too noisy. Transmission

times may be longer.

Parameter Signification

25 - TEL Impedance

This parameter lets you choose

between a complex impedance

and a 600 Ohm impedance,

depending on the telephone

network your terminal is connected

to.

73 - Improve rep @

This parameter lets you

automatically register the Internet

address of your subscribers fax

during a call (if available).

74 - Erase mailbox

When the fax machine receives an

e-mail with an attachment and

cannot open it, it erases the

message from the ISP MBX, prints

and transmits with a notice of

uncomprehension to the message

sender.

At E-mail reception, the fax does

not destroy the MBX message, it

prints a notice of uncomprehension

asking you to recuperate this

message with your computer

equipment.

This parameter is useful only if you

have PC equipment. The memory

capacity is limited, you need to

empty your MBX or else new

messages may not be received.

75 - Text Attchmt.

Editing ON / OFF and printing the

received Internet documents.

76 - Attchmt. form

Default format of document sent

on the Internet:

PDF : monochrome or colour

IMAGE : monochrome (TIFF) or

colour (JPEG)

77 - LAN speed

To define the communication

speed of the peripheral units in

relation to the implemented Local

Area Network (LAN).

80 - Toner save

Makes printing lighter to save toner

cartridge ink.

81 - Font number

Starts the printing of the log list.

This parameter lets you set the

default PCL font. The possible

values are included between 5 and

128 included. The default value is

0 (Courier).

Parameter Signification

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info