Bedienungsanleitung Oki MB290 (Seite 44 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 39 -

6 - Parameters/Setup

Printing the functions guide

51 - PRINT / FUNCTIONS LIST

Press , enter 51 using the keypad.

The printing of the functions guide starts.

Printing the logs

The incoming and outgoing logs list the last 30

transmissions (incoming and outgoing) made by your

machine.

An automatic print out will take place after every 30

transmissions. However, you may request a print out at

any time.

Each log (incoming or outgoing) contains a table with the

following information:

• date and time of the incoming or outgoing document,

• subscriber’s number or E-mail address,

• transmission mode (Normal, Fine, SFine or Photo),

• number of pages sent or received,

• call duration,

• incoming or outgoing results: noted CORRECT if

properly transmitted,

information codes for special calls (polling, manual

subscribers, etc.)

• reason for call error (example: your subscriber does

not answer).

To print the logs:

54 - PRINT / LOGS

Press , enter 54 using the keypad.

The printing of the logs starts. The incoming and outgoing

logs are printed on the same page.

Print the list of setups

To print the list of setups:

56 - PRINT / SETUP

Press , enter 56 using the keypad.

The printing of the list of setups starts.

Font printing

You can print the list of fonts installed on your machine at

any time.

To print PCL fonts:

59 - PRINT / PCL FONTS

To print SG Script fonts:

50 - PRINT / SGScript FONTS

Lock the machine

This function prevents non-authorized people from

accessing the machine. An access code will be required

every time someone wants to use the device. After each

use, the device will lock automatically.

Before that you have to enter a lock code.

811 - ADVANCED FCT / LOCK / LOCKING CODE

1 Press , enter 811 using the keypad.

2 Enter your lock code (4 digits) with the keyboard,

confirm with OK.

3 Enter again your lock code (4 digits) with the

keyboard, confirm with OK.

4 Quit this menu by pressing the button.

Lock the keyboard

Every time you use your machine, you will have to enter

your code.

812 - ADVANCED FCT / LOCK / LOCK KEYBD.

1 Press , enter 812 using the keypad.

2 Enter the four-digit locking code with the keypad.

3 Press OK to confirm.

4 With the buttons  or , choose ON and confirm

with OK.

5 Quit this menu by pressing the button.

Important

The printing is not possible on A5

(or Statement) paper format.

Note

You can also access the PRINT menu

by pressing the button.

Important

The printing is not possible on A5

(or Statement) paper format.

Note

You can also access the PRINT menu

by pressing the button.

Important

The printing is not possible on A5

(or Statement) paper format.

Note

You can also access the PRINT menu

by pressing the button.

Important

The printing is not possible on A5

(or Statement) paper format.

Note

You can also access the PRINT menu

by pressing the button.

Important

If a code is already registered, enter

the old code before typing the new

one.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info