Bedienungsanleitung Oleo-Mac GS200E (Seite 28 von 202) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

644159

Zoom out

Zoom in

Vorherige Seite

1/202

Nächste Seite

RUS

• Wear safety glasses and hearing

protection. Further protective equipment

for head, hands, legs and feet is

recommended. Adequate protective clothing

will reduce personal injury by flying debris or

accidental contact with the saw chain.

• Do not operate a chain saw in a tree.

Operation of a chain saw while up in a tree may

result in personal injury.

• Always keep proper footing and operate

the chain saw only when standing on fixed,

secure and level surface. Slippery or unstable

surfaces such as ladders may cause a loss of

balance or control of the chain saw.

• When cutting a limb that is under tension

be alert for spring back. When the tension in

the wood fibres is released the spring loaded

limb may strike the operator and/or throw the

chain saw out of control.

• Use extreme caution when cutting brush

and saplings. The slender material may catch

the saw chain and be whipped toward you or

pull you off balance.

• Carry the chain saw by the front handle

with the chain saw switched off and away

from your body. When transporting or

storing the chain saw always fit the guide

bar cover. Proper handling of the chain saw

will reduce the likelihood of accidental contact

with the moving saw chain.

• Follow instructions for lubricating, chain

tensioning and changing accessories.

Improperly tensioned or lubricated chain may

either break or increase the chance for kickback.

• Keep handles dry, clean, and free from oil

and grease. Greasy, oily handles are slippery

causing loss of control.

• Cut wood only. Do not use chain saw for

purposes not intended. For example: do

not use chain saw for cutting plastic,

masonry or non-wood building materials.

Use of the chain saw for operations different

than intended could result in a hazardous

situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut (Fig.3).

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator.

Pinching the saw chain along the top of the

guide bar may push the guide bar rapidly back

towards the operator.

Either of these reactions may cause you to lose

control of the saw which could result in serious

personal injury. Do not rely exclusively upon

the safety devices built into your saw. As a

chain saw user, you should take several steps to

keep your cutting jobs free from accident or

injury.

Kickback is the result of tool misuse and/or

incorrect operating procedures or conditions

and can be avoided by taking proper

precautions as given below:

• Maintain a firm grip, with thumbs and

fingers encircling the chain saw handles,

with both hands on the saw and position

your body and arm to allow you to resist

kickback forces. Kickback forces can be

controlled by the operator, if proper precautions

are taken. Do not let go of the chain saw.

• Do not overreach and do not cut above

shoulder height. This helps prevent

unintended tip contact and enables better

control of the chain saw in unexpected

situations.

• Only use replacement bars and chains

specified by the manufacturer. Incorrect

replacement bars and chains may cause chain

breakage and/or kickback.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw

chain. Decreasing the depth gauge height can

lead to increased kickback.



WARNING - If correctly used, the

electric saw is a quick, easily handled

and efficient tool; if used improperly or

without the due precautions it could become

a dangerous tool. For pleasant and safe

work,always strictly comply with the safety

rules that follow and throughout this

manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oleo-Mac GS200E Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oleo-Mac GS200E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info