Bedienungsanleitung Oleo-Mac GS200E (Seite 29 von 202) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

644159

Zoom out

Zoom in

Vorherige Seite

1/202

Nächste Seite

RUS



WARNING: The power supply system

on your unit produces a very low-

intensity electromagnetic field. This field

could interfere with certain pacemakers.

To reduce the risk of serious or fatal injury,

persons with pacemakers should consult

their doctor or the manufacturer of the

pacemaker before using this machine.

WARNING: – National regulations could

limit use of the machine.

1 - Do not operate the machine unless you

have received specific instruction on

its use. First time users must familiarise

themselves thoroughly with the operation

of the machine before working in the field.

2 - The electric saw must only be used by

adults, and users must be in good physical

shape and familiar with the operating

instructions.

3 - Assemble bar and chain before

connecting the plug to the network (Fig.

2).

4 - Never start the electric saw without the

chain-guard on.

5 - Check that tension and frequency shown

on the plate correspond to the ones of the

network.

6 - Never use cables, plugs or extensions

which are defective or fail to comply with

relative standards.

7 - Immediately disconnect the plug if the

cable is damaged or cut. The electric

connection must be positioned so as

to prevent persons or vehicles from

damaging it, thus jeopardizing both

themselves and you.

8 - Check the cable location during work: it

must always be kept away from the chain

work area or/and never be stretched.

Never cut in the vicinity of other electrical

cables.

9 - Always cut from a firm-footed and safe

position. Only start cutting when the chain

is moving. During work use the teeth as a

support point.

10 - Ensure that trees fall in a safe direction.

11 - It is prohibited to fit any device other than

that supplied by the manufacturer.

12 - All labels with health hazards must be kept

in good conditions. In case of damage or

deterioration, immediately substitute

them (see Fig. 1).

13 - Never carry out operations or repairs on

your own that are other than routine

maintenance. Call specialised and

authorised workshops only.

14 - Always follow the manufacturer’s

instructions for the maintenance

operations.

15 - Check the saw daily to ensure that all

safety and other devices are working

properly.

16 - Never work with a saw that is damaged,

poorly repaired, or randomly modified. Do

not remove, damage, or make ineffective

any of the safety devices. Only use bars of

the length indicated in the table (Pag. 33).

17 - Only loan your saw to expert users who

are completely familiar with saw operation

and correct use. Give other users the

manual with operating instructions, which

they should read before using the saw.

18 - All electric saw service, other than the

operations shown in the present manual,

should be performed by competent

personnel.

19 - Keep this manual on hand and consult it

before each use of the tool.

20 - Please note that the owner or the user is

responsible for any accidents or damage

to third parties or their property.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oleo-Mac GS200E Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oleo-Mac GS200E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info