Bedienungsanleitung Olivetti ECR 6920F (Seite 34 von 59) (Englisch)

452056

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Department Range Sales Report

This report provides the number of transactions performed

by the departments within the defined range, and their related

sales totals.

1. Control lock key position: X only.

2. If an X mode manager password was defined, type the

[4-digit password] and press

3. Type the department number [01-99] that you want to

start from.

4. Type the department number [01-99] that you want to end

with.

5. Press

Department Group Sales Report

This report provides the same information as a Department

range Sales Report, but for all the departments associated

with the defined department group.

1. Control lock key position: X only.

2. If an X mode manager password was defined, type the

[4-digit password] and press

3. Type the department group number

to .

To issue a report containing the sales of the departments

of all the department groups, type .

4. Press .

Time Report

The time report provides the net total sales performed by the

cash register on an hourly basis.

1. Control lock key position: X or Z (bear in mind that a Z time

report resets all time totals to zero).

2. If a PRG and Z mode, or X mode, manager password was

defined type the [4-digit password] and press

3. Type

and then press .

Training Report

This report provides an X or Z report of the transactions

performed in the training mode. Like the ordinary X and Z

financial reports, a Z report resets all transaction totals to

zero and provides the same information as an ordinary X or

Z financial report with the exception that the report identifier

is "X0" or "Z0".

1. Control lock key position: X or Z. Bear in mind that in the

Z position the training report contents are cleared.

2. If a training mode password was defined, type the

[4-digit password] and press

3. Press

Open Table Report

This report provides information regarding the tables that

are still open and therefore not yet invoiced. Current

subtotals are provided for each open table so that you can

keep track of the sales undeway.

1. Control lock key position: X or Z. Bear in mind that in the

Z position the training report contents are cleared.

2. If a password was defined, type the

[4-digit password] and press

3. Press .

Electronic Journal Reports

An electronic journal report executed with the control

switch in the X position does not clear the electronic journal

memory (and therefore all transaction data are retained)

while the report executed with the control switch in the

Z position cancels electronic journal memory thus re-

storing it to its maximum line capacity programmed.

To momentarily interrupt report printing, press . Press

this key again to resume printing.

To cancel report printing, press .

Complete Electronic Journal Report

This report is a complete listing of transaction receipts and Z

financial reports taken within the maximum line capacity

programmed.

1. Control lock key position: X or Z. Bear in mind that in the

Z position the electronic journal memory contents are

cleared after you press

. Make sure there is plenty

of paper loaded in the printer.

2. If a PRG and Z mode, or X mode, manager password was

defined type the [4-digit password] and press

3. Press

When the contents of the electronic journal are printed, a

message is displayed along with a beep to indicate that the EJ

memory capacity has been restored to its programmed line

capacity.

Oldest Transaction Report

By entering the number of transactions you wish to view, this

report prints the selected number of oldest receipts and Z

financial reports performed and stored within the programmed

line capacity.

1. Control lock key position: X or Z. Bear in mind that in the

Z position the journal report contents are cleared. Make

sure there is plenty of paper loaded in the printer.

2. If a PRG and Z mode, or X mode, manager password was

defined type the [4-digit password] and press

3. Type a number between [001 and 999] indicating the

number of oldest reports wanted and press

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 6920F Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR 6920F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info