Bedienungsanleitung Olivetti ECR 8100 (Seite 31 von 70) (Englisch)

452057

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

ENGLISH

PAYMENT MEDIA STATUS

For payment media programming, you can specify a

4-digit status for each of the media types.

Media Types

1 = Cash

2 = Check

3 = Charge card

4 = Credit card 1

5 = Credit card 2

The 4-digit status consists of [HDLO] and flags for

[Specify Tender Amount], [Change Given] and

[Drawer Open].

NOTE: The Change option setting applies to all

types of payment media excluding cash

(Change Given is always enabled for this

type of payment).

To program the payment media:

1. Control lock key position: PRG.

2. Specify the [1-digit Media Type] and press .

3. Enter the [4-digit Status].

4. Press .

Example: For check payment media, define a high-digit

lock out of 6 (9999.99), with non-compulsory entry of

tender amount, change given and drawer open

disabled.

Type/Press:

PROGRAMMING IN-STORE EMBEDDED

PRICE BARCODES

The barcode reader must be able to read 8- or 13-digit

EAN/UPC barcodes. EAN/UPC codes read from a

product barcode label represent a standard numbering

structure that identifies the product being sold.

The barcode with embedded price of an article has a

specific structure that depends on the country in which

it will be used and to the EAN/UPC code you wish to

use. You can program up to 10 different barcode

configurations.

The following parameters need to be defined to

program your barcode:

To program an in-store price barcode:

1. Control lock key position: PRG.

2. Enter your in-store code [1 to 10] that identifies the

configuration of the barcode that you are

programming.

3. Press .

4. Enter the code type [0 or 1].

5. Enter the max. 3-digit country-specific code prefix

[000 to 999]. Three digits must always be used;

for example, to define a prefix of 24, enter

[024].

6. Enter the number of digits [1 to 3] that the country-

specific code prefix consists of. For example, if your

code prefix is 24, enter [2].

7. Enter the number of digits [1 to 8] that the price

incorporated in the bar code consists of.

8. Define whether to use a price check digit or not.

9. Enter the currency identifier [1 to 4].

10. Press .

High Digit Lock Out Specify Tender Amount

0 = No HDLO 0 = Not complusory

1 = 0.01 - 0.09 1 = Compulsory

2 = 0.01 - 0.99

3 = 0.01 - 9.99

4 = 0.01 - 99.99

5 = 0.01 - 999.99

6 = 0.01 - 9999.99

Change Given Drawer Open

0 = Enabled 0 = Enabled

1 = Disabled 1 = Disabled

Code Type

Country-specific code prefix

0 = Long (13-digit) 000 - 999

1 = Short (8-digit) (always enter 3 digits)

Code prefix length Price length

1 to 3 digits Max. 8 digits

Check digit Barcode price currency

0 = Disabled 0 = Local

1 = Enabled 1 = Foreign Currency no. 1

2 = Foreign Currency no. 2

3 = Foreign Currency no. 3

4 = Foreign Currency no. 4

Payment media status

Payment type

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 8100 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR 8100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info