16646
27
Zoom out
Zoom in
Vorherige Seite
1/65
Nächste Seite
20
Programming PLU Status
The PLU status programming procedure should only be performed if you
are interested in the Open PLU Price (Sub-department) option. Otherwise,
proceed to the next section entitled "Programming PLU Prices". The PLU
status options are the following:
0 = Fixed PLU Price (the factory set default setting)
1 = Open PLU Price (Sub-department option)
Proceed as follows to program a PLU status:
1. Slide the control switch to the PRG position.
2. Press the [PO] key to begin programming the PLU status.
3. Type the [PLU number between 1 and 99 or 200, depending on
the model purchased], press the [PLU] key, type the [PLU Status
number] and then press the [Department] key. Use the [Dept Shift]
key for departments from 7 to 12.
4. Repeat step 3 for all desired PLU numbers.
5. Press the [PO] key to finish programming the PLU status.
6. Continue to the next section on programming the PLU Price.
Example: Create PLU 6 with an open PLU price status to
Department 6.
Type/Press:
[PO] + [6] + [PLU] + [1] + [Department 6/12] + [PO]
Programming PLU Prices
Proceed as follows to program a PLU item price:
1. Slide the control switch to the PRG position.
2. Press the [Qty/Time] key to begin programming.
3. Type a [PLU number between 1 and 99 or 200, depending on the
model purchased] and then press the [PLU] key.
4. Type the [unit price] that you wish to assign to that PLU and then
press the appropriate [Department] key. Use the [Dept Shift] key for
departments from 7 to 12.
5. Repeat steps 3 and 4 for all desired PLU numbers. Note that when you
are programming PLU numbers consecutively it is not necessary to
type the PLU number each time. The system automatically prompts
you with the next PLU number.
6. Press the [Qty/Time] key to finish programming PLU prices.
Example: Create PLU 1 with a unit price of £1.50 assigned to
Department 3 and then create PLU 3 with a unit price of £10.00 assigned
to Department 12.
Type/Press:
[Qty/Time] + [1] + [PLU] + [150] + [Department 3/9] + [3] + [PLU] +
[1000] + [Dept Shift] + [Dept 6/12] + [Qty/Time]
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olivetti ECR5200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Olivetti ECR5200

Olivetti ECR5200 Bedienungsanleitung - Deutsch - 72 seiten

Olivetti ECR5200 Bedienungsanleitung - Französisch - 70 seiten

Olivetti ECR5200 Bedienungsanleitung - Spanisch - 72 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info