Bedienungsanleitung Olivetti LAB_S120 (Seite 48 von 64) (Englisch)

16706

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

5. To view the other available values, "TX SPEED 9.6" and

"TX SPEED 4.8", press the keys:

6. To confirm your choice, press the key:

7. To return the fax machine to its initial stand-by mode, press

the key:

TO ENABLE/DISABLE ECM

The ECM (Error Correction Mode) is a system for cor-

recting the errors caused by interference on the line. This

function only has effect if it has been enabled both on your

fax machine and on your correspondent's fax machine and

is indicated by a letter "E" appearing on the display.

The fax machine is set up to send documents in this mode.

However, you can set it up to send documents in normal

mode, as follows:

1. Press the key

until the display shows:

FAX SET-UP

2. Press the key:

The display shows:

DATE AND TIME

3. Press the key:

The display shows:

VARIOUS SETTINGS

4. Press the key:

The display shows:

ECM: ON

5. To view the other available option: "ECM: OFF", press the

keys:

6. To confirm your choice, press the key:

7. To return the fax machine to its initial stand-by mode, press

the key:

ECEIVING

DOCUMENT

POLLING

MODE

FIRST OF ALL, WHAT POLLING IS

It is a transmission request that a fax machine makes to another fax

machine so that the latter sends the document requested automati-

cally.

There are two main characteristics of communication using the polling

method:

• the user who is to receive the document requests trans-

mission. In other words, a user may connect to another fax

machine and request it to send a document (specially prepared) to

him, even when the user at the other end of the line is out.

• the transaction is paid for by the person who requested

transmission (that is, the user who receives the document) and

not the person whose fax machine sends the document.

TO MAKE A TRANSMISSION REQUEST (POLLING RECEPTION)

Arrange with your correspondent the time at which you

intend to make the transmission request so that he has time

to put the document to be sent in his fax machine. Then set

up your fax machine to receive the document, by program-

ming the dialling mode to be used to call your correspond-

ent and the time at which you wish to receive the document.

1. Press the key

until the display shows:

POLLING RX

2. Press the key:

The display shows:

TYPE TIME

HH:MM

At this point, you can confirm the current time or overwrite

the time with the correct one, for example "18:20".

3. To overwrite the new time, press the keys:

4. To confirm both the current time and the new time, press the

key:

The display shows:

TYPE FAX NUMBER

NUM/TOUCH/SPEED

5. Dial the correspondent's number using any of the available

methods: directly on the numeric keypad or using the one-

touch dialling keys or speed dialling codes.

To do this, press the keys:

6. To confirm the setting, press the key:

The fax machine shows the message "POLL SET" for a few

seconds and then returns automatically to its initial stand-by

mode. The second line of the display shows: "POLL. RX:

18:20".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti LAB_S120 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti LAB_S120

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info