Bedienungsanleitung Olsberg ARINA 2.0 (Seite 79 von 160) (Deutsch, Englisch, Französisch)

812264

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Operating manual

for the user

LEVANA 2.0 6 kW

LEVANA 2.0 8 kW

LEVANA AQUA 2.0

ARINA 2.0

INARA 2.0

PARTY FUNCTION ON

The party function is switched on by a long press of the

“Party button”, i.e. the preset switching times (see “Timer

program”) are ignored and the pellet replace heats at the

output stage which is set.

If switched on in the “Heating operation” operating state,

the next “switch-o time” is ignored, the pellet replace

continues heating. The party function automatically

switches o at the next switch-on time and the pellet re-

place resumes working as programmed.

If switched on in the “Ready” operating state, the “switch-

o time” which has already occurred is ignored and the

pellet replace ignites in order to start heating operation.

The party function automatically switches o at the next

switch-on time and the pellet replace resumes working

as programmed.

PARTY FUNCTION OFF

The party function can be manually switched o by press-

ing the “Party button” again.

“Operating state” display

SWITCHED OFF

The pellet replace is switched o by pressing the “ON/

OFF button”. Automatic start (heating operation) cannot

occur in this operating state. Exception: frost protection

(see “Frost protection” chapter)

READY

Heating is enabled by pressing the “ON/OFF button”. Since

all of the conditions for starting the combustion process

are not met, the ignition process is not started. Instead, the

pellet replace is put into the “Ready” operating state. The

following conditions must be met to directly start the igni-

tion process:

- No outstanding error message

- Combustion chamber door closed

- Pellet reservoir cover closed

- No relay test is currently being performed (service)

- Flame temperature has cooled to below 100 °C

- The connected external room temperature sensor

contact is closed.

The room temperature has dropped to the set value.

- The current time is within the switching time

(with switching time active).

IGNITION

The pellets are automatically deposited in the burner

trough and ignited. Ignition takes longer during initial

commissioning because the screw conveyor is lled with

pellets rst. An extended special ignition program is

started after an error message.

START

The pellet volume is steadily increased until the maximum

output stage is reached.

HEATING OPERATION

The pellet replace heats to the output stage which is set.

CLEANING

Minor cleaning:

“Minor cleaning” is carried out every hour

takes a short time. The screw motor is switched o and the

ue exhauster runs at maximum speed. The burner trough is

thus cleaned. Heating operation automatically continues.

Major cleaning:

“Major cleaning” is carried out every eight

hours. Here, the combustion process is stopped. The screw

motor is switched o and the ue exhauster runs at maximum

speed. The burner trough is thus cleaned. “Major cleaning” lasts

until the ame temperature has cooled to below 100 °C. The

combustion process automatically restarts.

BURNOUT

The combustion process is ended. After burnout, the

pellet replace is in “O” mode. The “ON/OFF button” must

be pressed to resume heating operation. If timer times are

set, then the pellet replace goes to ready. This requires

the pellet replace to have been started or put into ready

mode with the on button for the rst time.

“MENU” display

Ready

08:17

Desired °C

Party

Abb. 3.16 Touch-Bedienfeld - Anzeige MENÜ

Operating keys in the “MENU” display

WIFI

Selection options: WI-FI ON/OFF;

WI-FI settings; app settings

GENERAL INFORMATION

Software version;

Maintenance interval; Operating hours;

External requirements

GENERAL SETTINGS

Convection air blower; Frost protection;

Night time reduction; Max. output; Temperature drop;

Temperature OFF; Follow-up; Other settings (operating

modes, language settings, timer programs, date/time)

We reserve the right to make technical changes

78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 7978-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 79 11.04.2023 14:41:5811.04.2023 14:41:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olsberg ARINA 2.0 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info