Bedienungsanleitung Olsberg ARINA 2.0 (Seite 81 von 160) (Deutsch, Englisch, Französisch)

812264

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Operating manual

for the user

LEVANA 2.0 6 kW

LEVANA 2.0 8 kW

LEVANA AQUA 2.0

ARINA 2.0

INARA 2.0

LEVANA AQUA 2.0:

16:58

Buffer-ON temp.

Puffer-OFF temp.

°C

Fig. 3.19 Touch control panel – Display for LEVANA AQUA, buer ON/OFF

Buer ON and buer OFF

The buer ON temperature can be set to between 35 °C and 65 °C

and the

buer OFF temperature can be set to between 40 °C and 70 °C.

The pellet replace ignites if both sensor temperatures are lower

than the buer ON temperature which has been set.

The pellet replace switches from the “Heating operation” operating

status to “Ready” if the bottom sensor temperature is higher than

the buer OFF temperature which has been set. In order to mini-

mise the loss of heat from the buer, the lowest temperatures for

the application should always be selected.

Example:

Buer ON factory setting: .........................................................................50 °C

Buer OFF factory setting: ...................................................................... 70 °C

The pellet replace only ignites if both sensor temperatures (top

and bottom) fall below 50 °C.

The pellet replace only goes into the “Ready” operating state if the

bottom sensor temperature rises to above 70 °C.

Operating keys in the “Settings” display

Operating modes / operating modes selection menu:

- Manual

- Automatic

Languages / language settings selection menu

- German

- English

- French

Timer programs / switching times selection:

- Week block

- Weekend

- Working days

Date/time selection

- Date

- Time

- Time zones oset

Note! Switching between the pictograms is possible at any

time.

“OPERATING MODES” display

ManualAuto

Operation mode

Fig. 3.20 Touch control panel – Operating mode

MANUAL operating mode

ManualAuto

Operation mode

Fig. 3.21 Touch control panel – Manual operating mode

As soon as this operating mode has been selected, operation of the

pellet replace is possible with no further settings.

To do this, select the desired output stage and start heating opera-

tion with the “ON/OFF button”.

In “Manual” operating mode, the pellet replace heats at the preset

output stage in continuous operation until heating operation is

ended using the ON/OFF button.

Attention: saved switching times are only taken into consideration

in automatic mode.

The output stage can be set to 1-5 at any time:

ū Output stage 1 corresponds to the partial heat output

ū Output stage 5 corresponds to the nominal heat output

ū Factory setting: 4

Operating manual

for the user

We reserve the right to make technical changes

78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 8178-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 81 11.04.2023 14:41:5811.04.2023 14:41:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olsberg ARINA 2.0 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info