Attach the extension paper tray
Attach the extension paper tray by inserting its two pegs at a slightly upward angle
into the appropriate holes, as shown.
Plug in and power up
1
Plug one end of the telephone line cord into the
LINE
jack on the machine’s
rear side and the other end into a standard telephone wall jack.
2
Plug the non-pronged end of the AC power cord into the AC power cord jack
on the right rear side of the machine and the pronged end into a 230 V electri-
cal outlet (preferably on a surge suppressor, as mentioned on page 1.5).
Important: Be sure that you do not turn the power on (next step) until after
you have unlocked the mirror carriage locking plate. (see page
1.5).
3
Use the AC power switch to turn on your machine. The markings are interna-
tional standards: I means on, O means off.
It will take a few seconds for the machine to warm up. The
LCD
shows:
When the machine is ready to use (standby mode), you will see:
Fax Ready
1 Jan 2001 0:00
** Warming Up **
1.7
Getting started
