1.8
Getting started
Turning off the transport mode
Important: After unlocking the mirror carriage (see page 1.5), you must turn the
transport mode off by following procedures.
When the machine is in the transport mode, the
LCD
shows:
To turn off the transport mode:
1
Press Program key, *,
E
.
2
Select Off by pressing or . Then press
ENTER
to turn off the transport
mode. The mirror carriage will move to the home position.
Important: If you must reship the machine, turn on this mode to move the mirror
carriage to the transport position (in step 2, above, press or to
set the transport mode to On), then power off and lock the mirror car-
riage using the mirror carriage locking plate (see page 1.5).
Loading paper
Acceptable paper size and cassette capacity
Paper source Paper type Paper size Capacity
Paper cassette Plain paper*
1
A4 ,A5 , F4 500 sheets
A4 ,A5 , A6 , F4 ,
Plain paper*
1
Letter , Legal , Half-letter , 50 sheets
Bypass Tray Executive , Custom-sized*
2
Envelopes DL , CM10 , Monarch 1 sheet
Postcard 100 × 148mm 20 sheets
Transparency*
3
A4 20 sheets
*
1
Paper weight: 60 – 90 g/m
2
*
2
(97 – 216) mm × (140 – 356) mm (Width × Length): It only can use if the optional
Printer Controller is attached.
*
3
We recommend: 3M PP2500 for laser printers or equivalent
Note: Do not use any paper which has been creased, wrinkled or has absorbed any
moisture.
Loading paper in paper cassette
Before you load paper, note the following:
• After you loaded paper in paper cassette, you must need to “tell” your machine
which size of the paper, A4-, A5- or F4-sized, you loaded.
You can do this by the “Setting of the paper size” operation. (See next page.)
Note:If you will be using A4-sized paper, there’s no need to adjust the cassette;
your machine is initially set for A4-sized paper. Simply attach the A4
sticker to the outside of the paper cassette.
1
Open the paper cassette from the front of your machine by gently pulling it
toward you.
Mirror Locked :Off
/
/Enter
Mirror Locked :On
/
/Enter
Mirror Locked
