Bedienungsanleitung Olympus e-10 (Seite 18 von 118) (Deutsch, Englisch, Französisch, Spanisch)

287645

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Shutter speed, aperture value

Exposure compensation

Selected for printing

White balance setting

ISO (AUTO, ISO setting)

Flash intensity compensation

Frame number (or rate of enlargement if

image enlarged for display)

Time picture

taken

Date picture

taken

Standard DCF

file information

Folder name/

file name

Memory card

Protected

Record mode (resolution, compression)

Playing Back Images

To enter the playback mode so you can view

images, set the mode dial to , or with the

mode dial set to P, A, S or M, rapidly press the

monitor button twice. The image of the

most recent picture taken is displayed in the

monitor. Press or to display the previous

or next image. Press or to jump 10

frames to the previous image or jump 10 to the

next image.

If you want to enlarge an image, set the mode

dial to playback , and then turn the main dial

to the right toward the magnifying glass mark

(or turn the sub dial clockwise). Every time

you move the dial one position to the right, the

magnification of the image increases. Use the

pointers on the arrow pad to scroll the image

left, right, up, or down. To restore the original

display, rotate the main dial to the left (or rotate

the sub dial counterclockwise).

If you want to display more than one image in

the monitor, use the index display. Set the

mode dial to playback , and then turn the

Viewing and Managing Images

main dial to the left toward the index mark (or

turn the sub dial counterclockwise). Every time

you move the dial one position to the left, the

number of images displayed in the index

increases (4, 9, 16). To move the green

highlight in the index, press or to select

the previous or next image. Press or to

display the previous or next index. With the

green highlight on the image you want to

select, rotate either dial to the right to return to

the single-image display.

To leave the playback mode, if the mode dial is

set to playback , set the mode dial to P, A, S

or M. If the mode dial is set to P, A, S or M,

press the monitor button once to switch off

the monitor.

You can also use the playback mode menu to

set up a slide show that will automatically

display each image for 5 seconds continuously,

starting with the currently displayed image, until

you press the or button.

Displaying Image Information

While viewing an image during playback, you can display the information about the settings when the

picture was taken. Set the mode dial to playback (or with the mode dial set to P, A, S or M, rapidly

press the monitor button twice). Hold down the INFO button and then turn the main dial or

sub dial to the right or left to select one of the three information display formats superimposed on the

displayed image. If the histogram feature is switched on, an additional display will show the

histogram. The histogram display can be switched on in the shooting mode. The sample below shows

the display with all the information (without the histogram).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus e-10 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus e-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info