Bedienungsanleitung Olympus e-10 (Seite 19 von 118) (Deutsch, Englisch, Französisch, Spanisch)

287645

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

English

DCIM

100 OLYMP

P2030001.jpg

P2030002.jpg

P2030003.jpg

P2030004.jpg

All folders

Folder number

(100~999)

File name

Pmdd .jpg

OLYMP

Month (10, 11, 12 are

numbered A, B, C)

Day (01~31)

File number (0001~9999)

After taking 9999 pictures, the counter is reset

to 0001 for the next picture, the folder number

increments by 1 to name and create a new

folder where the next image (file) is stored.

Folder name

Selecting an Image File Naming

Scheme

The camera automatically assigns a file name

to every image and then saves it in a folder on

the card. These file names can be used to

select and process images on a computer.

Folders are named with three digits in the

format nnnOLYMP. Files are named with four

digits in the format Pmdd왕왕왕왕.jpg.

Set the mode dial to the setup/connection mark

, and then press the menu button . On the

arrow pad, press or to select FILE NAME.

Press to move the green highlight to the

right. Press or to move the green highlight

to AUTO or RESET. Press the button to

select the setting, and then press the button

to close the menu.

You can select the naming scheme with the

FILE NAME item in the setup/connection mode

menu. The AUTO selection numbers all files

and folders consecutively for every card you

use to ensure that no file names are duplicated.

The RESET selection restarts file numbering

every time you insert another card.

Protecting Images

Images stored on a card can be protected from

accidental deletion. Enter the playback mode

and display the image that you want to protect.

Press the protect button . A protect mark

is displayed on the image. To remove

protection, display the protected image and

press the protect button to switch off the

protect mark. If you want to protect all the

images on a SmartMedia card, attach a protect

seal to the card. Please remember that

protecting an image does not protect it if the

card is formatted.

Deleting Images

Delete poorly exposed or other images that you

do not want to keep to create more storage

space on a card. Enter the playback mode and

display the image that you want to delete. (You

can also delete images in the index display.

Just move the green highlight to the image that

you want to delete.) Press the erase button

, press to select YES, and then press

the button. The card access lamp blinks as

the image is erased. If you want to delete all

images on the card, select the card that you

want to erase. Use the card erase option of the

CARD SETUP feature in the shooting mode to

erase all the images on the card.

Copying Images to Another Card

With two cards installed in the camera, you can

select images one by one for copying to the

other card, or copy all images to the other card.

Insert the source and destination cards in the

camera.

Formatting a Memory Card

A card which has been formatted for use on a

computer or another camera, must be

formatted before it can be used with this

camera. Formatting deletes all images and

information stored on a card.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus e-10 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus e-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info