Bedienungsanleitung Olympus FC-1 Macro Flash System (Seite 2 von 53) (Englisch)

589209

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

2 3

Thank you for purchasing the OLYMPUS Macro Flash System. Before use, please read this instruction manual to ensure

your safety, and keep it handy for future reference.

SAFETY PRECAUTIONS (Be sure to read and observe the following.)

This instruction manual uses a variety of common symbols and icons to assist you in proper handling and usage of this

product, and to warn you of potential hazards to yourself and others as well as to property. These symbols and their

significance are described below.

DANGER

Failure to observe the

precautions indicated by this

symbol may result in serious

injury or death.

WARNING

Failure to observe the

precautions indicated by this

symbol may result in injury

or death.

CAUTION

Failure to observe the

precautions indicated by this

symbol may result in injury or

property damage.

Symbols for prohibiting action Symbol instructing action

Prohibited

Disassembly

prohibited

Mandatory

 This Macro Flash System has been designed exclusively for use with Olympus digital cameras. Do not connect the

Macro Flash System to a camera not manufactured by Olympus, as this may result in a malfunction or damage to the

camera and/or Macro Flash System.

DANGER

 The Macro Flash System incorporates high-voltage circuitry. Never attempt to disassemble or modify it, as

this may result in electric shock and/or injury.

 Do not touch the ring flash connector or twin flash connector terminals on the FC-1 Macro Flash Controller.

 Do not use the Macro Flash System where it may be exposed to flammable or explosive gas. Otherwise, fire

ignition or explosion may result.

 To prevent a traffic accident, do not direct the flash towards the driver of a car.

For customers in Europe

The “CE” mark indicates that this product complies with the European requirements for safety, health, environ-

ment and customer protection. CE-mark products are for sale in Europe.

For customers in USA

FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate.

For customers in CANADA

This Class B digital apparatus complies with Canadian ICES-003.

WARNING

 Do not fire the flash or AF illuminator light immediately in front of a person’s eyes (particularly an infant).

Exposure to the light from the flash at a very short range may cause irreparable injury to the eyes. Be espe-

cially careful to avoid using the Macro Flash System at a distance of less than 1 meter from an infant.

 Do not leave the Macro Flash System and batteries within reach of children.

• If a child swallows a battery or small accessory, see a doctor immediately.

• If the flash is emitted near a child, their eyes may be injured irreparably.

• Moving parts of the Macro Flash System could injure a child.

 Avoid the following actions to prevent fire or injury due to battery fluid leak, overheating, fire ignition or

bursting.

• Do not use batteries that are not specified for use with this Macro Flash System.

• Do not throw the battery in a fire, expose it to heat, short-circuit it, or disassemble it.

• Do not mix old and new batteries, or batteries of different types or brands.

• Do not attempt to recharge non-rechargeable batteries such as alkaline batteries.

• Do not load batteries with the +/– polarity reversed.

 Do not store the Macro Flash System in a place exposed to excessive dust or moisture. Otherwise, fire or

electric shock may result.

 Do not use the flash when it is covered by a flammable object such as a handkerchief.

Do not touch the light-emitting area after use. It will be very hot and could burn you.

 If the Macro Flash System is dropped in water or any fluid gets inside, immediately remove the batteries and

contact your dealer or Olympus. Continued use could result in fire or electric shock.

 If you notice any abnormalities such as leakage, discoloration, deformation, overheating, or odor, stop using

this device. Continued use could result in fire, overheating or explosion. Remove the batteries carefully to

avoid burning yourself and to prevent exposure to gas or dangerous fluids that may be released. For repair,

contact Olympus.

 Always remove the batteries when you don’t expect to use the Macro Flash System for a long period. Other-

wise, heat generation or fluid leak from the batteries may result in fire, injury and/or contamination of the

surroundings.

 Do not use a leaking battery. Doing so could result in fire or electric shock. Please contact your dealer or

Olympus.

 Do not handle the Macro Flash System with wet hands. Doing so could result in electric shock.

 Do not leave the Macro Flash System in a place where it may be exposed to high temperatures. Otherwise,

deterioration of parts or fire may result.

 Do not take out the batteries immediately after using the Macro Flash System continuously for a long period.

Otherwise, the hot batteries may cause burns.

 Do not deform the battery compartment or allow any foreign objects to get inside.

CAUTION

Olympus FC-1 Macro Flash System Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info