Bedienungsanleitung Olympus VN-7200 (Seite 4 von 10) (Englisch)

584982

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

4EN

Inserting batteries

▼

Strap hole (Strap is not supplied.)

When [ ] appears on the display,

replace the batteries as soon as

possible. When the batteries are

too weak, [ ], [LO] and [bATT]

appears on the display and the

recorder shuts down.

• Remove the batteries if you are not

going to use the recorder for an

extended period of time.

Turning on the power

Slide the POWER switch to the [ON]

position.

OFF

Turning off the power:

While the recorder is in stop mode,

slide the POWER switch to the [OFF/

HOLD] position.

Power save mode:

If the recorder is on and stops for 5

minutes or longer, the display shuts

off and it goes into power save mode.

To exit power save mode, press any

button.

HOLD:

If you slide the POWER switch to the

[OFF/HOLD] position, the current

conditions will be preserved, and all

buttons will be disabled.

Setting time and date

[dATE]

If you set the time and date

beforehand, the information will be

stored automatically when the file

is recorded. This function enables

easier file management.

" When you install batteries for

the first time or each time you

replace the batteries, the “hour”

indicator will flash. When the

“hour” is flashing, conduct the

setup from step 4.

1 While the recorder is during

stop mode, press and hold the

DISP/MENU

button.

2 Press the + or − button to select

[

dATE

3 Press the `

button.

• The “hour” will flash on the

display.

4 Press the + or − button to change

the setting.

5 Press the `

or 9 button to

set.

• Repeat step 4 and 5 to set

“minute”, “year”, “month” and

“day”. After the “day” has been

set, the recorder’s clock will start

working.

• You can select between 12 and

24 hours display by pressing

the DISP/MENU button while

setting the hour and minute.

• You can select the order of the

“month”, “day” and “year” by

pressing the DISP/MENU button

while setting them.

6 Press the

STOP

(4) button to close

the menu screen.

Recording

The recorder provides four folders,

[&], ['], [(] and [)]. To change

the folder selection, press the

FOLDER/INDEX button while the

recorder is stopped. These four folders

can be selectively used to distinguish

the kind of recording; for example,

Folder [&] might be used to store

private information, while Folder [']

might be dedicated to store business

information.

1 Press the

FOLDER/INDEX

button

to select the desired folder.

• Newly recorded audio will

be saved as the last file in the

selected folder.

2 Press the

REC

(s) button to start

recording.

• The recording indicator light will

turn on.

• Turn the microphone in the

direction of the source to be

recorded.

3 Press the

STOP

(4) button to stop

recording.

Pause:

If the recorder is in recording mode

and the REC (s) button is pressed,

recording pauses. If the REC (s)

button is pressed again, recording

resumes.

• To ensure recording from the

beginning, start recording after you

see the display and the recording

indicator light turning on.

Recording mode

Current folder

File number

Microphone sensitivity

Elapsed recording time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus VN-7200 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus VN-7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info