Bedienungsanleitung Olympus VN-7200 (Seite 5 von 10) (Englisch)

584982

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

• If the number of files inside the

recording folder reached 200 or

the memory becomes full, you will

not be able to record any further,

and [FULL] will be displayed.

Select another folder or delete any

unnecessary ﬁle before recording.

• When the remaining recording

time is less than 60 seconds, the

recording indicator light starts

ﬂashing. When the recording time

is decreasing to 30 or 10 seconds,

the light ﬂashes faster.

Recording from external microphones

or other devices:

External microphones and other

devices can be connected and the

sound can be recorded. Microphones

supported by plug-in power can also

be used.

• Do not plug and unplug devices

into the recorder’s jack while it is

recording.

• The built-in microphone will

become inoperable when an

external microphone is plugged

into the recorder’s MIC jack.

Playback

1 Select the file to be played from the

folder.

• Press the FOLDER/INDEX

button to select the folder, and

the 9 or 0 button to select

the file.

2 Press the `

button to start

playback.

3 Press the

−

button to adjust to

a comfortable listening volume.

• The volume can be adjusted

within a range from [00] to [30].

4 Press the

STOP

(4) button at any

point to stop playback.

Playback through earphone:

An earphone can be connected

to the EAR jack of the recorder for

listening.

• To avoid ear irritation, insert the

earphone after turning down the

volume level. When you listen with

the earphone during playback, do

not raise the volume too much.

It may cause hearing impairment

and a decrease in hearing ability.

Forwarding and rewinding:

While the recorder is during playback

mode, press and hold the 9 or

0 button.

• When you release the button

the recorder will resume normal

playback.

• If there is an index mark in the

middle of the ﬁle, the recorder will

stop once at that position.

Locating the beginning of a file:

While the recorder is during stop

mode or playback mode, press the

9 button.

• The recorder skips to the

beginning of the next ﬁle.

While the recorder is during playback

mode, press the 0 button.

• The recorder skips to the

beginning of the current ﬁle.

While the recorder is during stop

mode, press the 0 button.

• The recorder skips to the

beginning of the previous ﬁle. If

the recorder is in the middle of a

ﬁle, it will return to the beginning

of the ﬁle.

While the recorder is during playback

mode, press the 0 button twice.

• The recorder skips to the

beginning of the previous ﬁle.

• During playback, skipping to the

beginning of a ﬁle that contains an

index mark will make the playback

start from the closest index mark

position.

• When you try to skip to the

beginning of the file during

playback, setting the [SKIP]

to [ON] will make the recorder

forward skip 10 seconds or reverse

skip 3 seconds.

Changing the playback speed

1 Press the `

button to start

playback.

2 Press the `

button again to open

the playback speed adjustment

display.

3 Press the

−

button to adjust

the playback speed.

[1.0 PLAy]: Playback at normal

speed.

[0.5 PLAy] – [0.9 PLAy]: Playback

speed slows down.

[1.1 PLAy] – [2.0 PLAy]: Playback

speed becomes faster.

4 Press the `

button to complete

the setting.

• If you leave the recorder for

3 seconds, the setting will be

applied and the recorder will

return back to the original screen.

• Even if playback is stopped, the

changed playback speed will be

retained. The next playback will be

at that speed.

• If you set the noise cancel function

to [ON], you will not be able to

change the playback speed.

How to begin segment repeat

playback: (For VN-7200 only)

1 Press the `

button to start

playback.

2 Press the

REC

(s) button at the

point you want to start segment

repeat playback.

• [A] will flash on the display.

• Reaching the end of a file while

[A] is still flashing will make

that point the end position, and

make repeat playback start.

3 Press the

REC

(s) button again at

the position where you want to end

segment repeat playback.

• [A-b] will appear on the display.

• The recorder repeatedly plays

back the segment until the

segment repeat playback is

canceled.

• As in normal playback mode,

playback speed can be changed

during segment repeat playback

as well.

Current folder

File number

Elapsed playback time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus VN-7200 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus VN-7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info