Bedienungsanleitung Omni OMB2010 - Tagma (Seite 4 von 24) (Englisch)

519111

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

www.omni-tness.eu

SAFETY INSTRUCTIONS

This device complies with the requirements of the stand-

ards EN 957-1, EN 957-5, use class H (H = home use). The

device is designed for home use. The device was tested

taking safety factors according to European standard EN

957 into consideration.

Please note that this is a class A exercise device. It thus has

an extremely accurate display.

This is a speed and/or rpm independent device. When oper-

ating the device the resistance is kept constant independ-

ently of the speed.

Resistance measurement/wattage measurement:

The wattage measurement and/or resistance measure-

ment is taken o at the crank (without taking the pedals

into consideration).

Measuring with the pedals assembled would lead to devia-

tions.

Individual user data, such as size, weight and custom set-

tings to the pedals also have a considerable inuence on

the value.

Performing wattage measurement

Speed for test: Settings to check:

50 rpm 50 W and 100 W

60 rpm 150 W and 200 W

The CE label relates to the electromagnetic compatibil-

ity of the device (EU Directive 2004/108/EU). The tness

equipment is not a toy and must be kept out of the reach

of children when not used. Keep small children out of the

range of the device during exercise in order to avoid risk of

injury. Proper use of this equipment is reserved for adults

or youths with appropriate physical and mental develop-

ment. Make sure that each user is familiar with the use and

handling of the device or is under supervision. Parents and

other guardians should be aware of their responsibilities,

as children's natural play instinct and love of experiment-

ing can result in situations and behaviour for which the

tness equipment was not designed.

Above all, point out to children that the equipment is not

a toy.

To avoid impairing your health, or to minimise existing

risks, consult a doctor before your rst exercise session to

perform a general tness check. In case of special impedi-

ments, e.g. if you have a pacemaker, are pregnant, have

orthopaedic problems or take medication, please discuss

the exercise with your doctor rst. Improper or excessive

exercise can endanger your health, cause damage/injury,

and even fatality! Stop training immediately if you feel

weak or dizzy, if you feel nauseous or experience chest

pain, heart palpitations, or other symptoms. Consult a doc-

tor immediately if these symptoms arise.

Excessive temperature changes, high moisture levels, and

wetness can aect the working life of your exercise equip-

ment, in particular of electronic parts, and may damage

them beyond repair.

The equipment is not suitable for outdoor use.

To achieve optimum training results and avoid injury,

always allow time for a warm-up phase before training and

a cool-down phase after training. Check the "Warm-up and

Stretching Exercises" section for appropriate exercises.

When exercising, wear comfortable, but not excessively

loose clothing in order to avoid getting caught. Always

wear suitable footwear, such as gym shoes; never exercise

bare footed.

"WARNING! Heart frequency monitoring systems can be

inaccurate. Excessive exercising can damage your health

or be fatal. Stop exercising immediately if you feel dizzy/

weak".

The braking system on this device is not adjustable.

Before you start exercising, make sure the equipment is

standing rmly on a stable and at surface. Make sure the

surface is rm, at and not slippery. Level the device in

case of an uneven oor.

Note minimal insertion point marks - "max" for maximum

mark - when setting up the equipment.

When exercising with the

equipment, make sure that

you have enough space to

move and that no levers,

adjusting mechanisms or

setting aids, or persons, es-

pecially small children, pro-

trude into the movement

area and thus impair your

training or cause injury.

We recommend a safety

margin of 1.5 x 1.5 m around

the device. After use, always leave or store the tness

equipment in a safe state to avoid injury from protruding

parts.

Wattage testing

device

Motor

system

Computer

Wattage

display

CPU

Controller

Braking

system

Flywheel

116

148

OMB2010 Tagma_Instructions manual 2011_GB.indd 4 23.01.2012 17:20:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Omni OMB2010 - Tagma Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info