Bedienungsanleitung Omnitronic MMP-1 (Seite 24 von 40) (Deutsch, Englisch)

490496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

00040292.DOC, Version 1.0

24/40

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it

on immediately. The arising condensation water might damage your device. Leave the device switched off

until it has reached room temperature.

Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless, disconnect

from mains immediately. Please let the device be checked by a qualified service technician before you

operate it again. Any damages caused by liquids having entered the device are not subject to warranty!

Always disconnect from the mains, when the device is not in use or before cleaning it.

Please note that damages caused by manual modifications on the device or unauthorized operation by

unqualified persons are not subject to warranty.

CAUTION: Turn the amplifier on last and off first!

Keep away children and amateurs!

HEALTH HAZARD!

By operating an amplifying system, you can produce excessive sound pressure levels that may

lead to permanent hearing loss.

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried

out by authorized dealers.

3. OPERATING DETERMINATIONS

The MMP-1 with two player mechanisms and built-in mixer has been specially designed for professional

DJ applications. The unit features many functions that precisely meet the requirements of DJs, e.g. beat

counter, adjustable pitch, cueing, seamless playback of a continuous loop, single title replay, search via

rotary wheel, or storage of Hot Cue/Loop points.

The MMP-1 plays titles in the MP3 format from SD cards or USB storage media with a maximum capacity

of 32 GB. Storage media with a capacity above 32 GB cannot be used. The unit is compatible with SDHC

(high capacity) cards. Only files in the MP3 format are supported.

The crossfader allows for crossfading between both input channels and sending the mixed signal to one

stereo output. Alternatively, the mixing function can be deactivated and the signals of the input channels are

sent to separate stereo outputs.

The MMP-1 is provided with an unlimited anti-shock memory which is able to compensate shocks or

vibrations.

This product is allowed to be operated with a direct current of 6 V, 50/60 Hz and was designed for indoor use

only.

The device must only be operated with the included power unit. The power unit falls under protection-class 2

and the MMP-1 under protection-class 3.

Do not shake the device. Avoid brute force when installing or operating the device.

When choosing the installation spot, please make sure that the device is not exposed to extreme heat,

moisture or dust. There should not be any cables lying around. You endanger your own and the safety of

others!

The ambient temperature must always be between 0° C and +40° C.

The relative humidity must not exceed 50 % with an ambient temperature of 40° C.

This device must only be operated in an altitude between -20 and 2000 m over NN.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Omnitronic MMP-1 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info