Bedienungsanleitung Omnitronic MMP-1 (Seite 26 von 40) (Deutsch, Englisch)

490496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

00040292.DOC, Version 1.0

26/40

4.2 Operating elements and connections

1 Source selection

SOURCE SELECT toggles each player mechanism

between slot A and B in pause or cue mode. The LEDs

will verify which slot is active. The green LED signifies

slot A, the red LED signifies slot B. If the desired storage

media is not recognized instantly (e.g. when both slots o

a player mechanism are occupied with an SD card and a

USB device) press SOURCE SELECT repeatedly to

toggle between both slots until the display indicates the

first title of the desired storage media. Both decks can

read simultaneously from the same slot, playing the same

title on both decks is also possible.

2 LCD

Indicates all functions of the unit and information of the

storage media.

The display icons will be explained in section

DISPLAY.

3 Pitch control

This sliding control sets the replay speed (with the

function ”Tempo Lock“ activated, the tonal pitch will not

be changed). The adjustment of the control is effective

only with the button PITCH ON/OFF pressed. The pitch

percentage is indicated in the display.

4 Channel faders

Level controls for player mechanism 1 and 2.

5 SD card slot

Slot for inserting an SD card. The contacts of the card

must point downwards. The unit reads SD cards and

SDHC cards with a capacity of up to 32 GB and only

supports the MP3 format. CAUTION! Prior to ejecting an

SD card, always terminate the replay.

6 USB port A

USB port (type A) for connecting a USB device (e.g. USB

stick, MP3 player) with a maximum capacity of 32 GB and

titles in the MP3 format. CAUTION! Prior to removing a

USB device, always terminate the replay.

7 Gain

Gain controls for adjusting the input amplification fo

player mechanism 1 and 2. Reduce gain if the output

level of the MMP-1 is too high for the following unit.

8 IN/OUT/RELOOP

Buttons to memorize and replay a continuous loop:

IN: A Sets the starting point of a loop.

B Sets the Cue point without interrupting the music

(“on the fly“).

OUT: Defines the end point of a continuous loop which

is instantly started (LOOP comes on in the LCD). The

loop will continue to play until the button OUT is pressed

once again.

RELOOP: Starts the loop once again (RELOOP comes

on in the LCD). Press the button OUT to exit the loop.

9 Search mode/System menu

Shortly press SEARCH to switch the ROTARY

WHEEL to the function “fast forward/reverse“. With the

function activated, the LED will light up red. If the

ROTARY WHEEL is not actuated for 10 seconds, the

LED will go off and the function "fast forward/reverse“ is

deactivated again.

B Keep this button pressed for 2 seconds to enter the

system menu of the MMP-1 (control LED lights up

green). To exit the menu press SEARCH again for 2

seconds (control LED goes off). If the control FOLDER is

not actuated for 10 seconds in the menu mode, you exit

the menu automatically.

10 TAP/BPM

If the automatic beat counter is not able to determine the

number of beats per minute (BPM) of the current title, this

button allows you to manually set the BPM. Shortly

actuate this button to deactivate the automatic beat

counter. Then press the button several times to the beat

of the music. The BPM are indicated on the display. Keep

the button pressed for 2 seconds to return to the

automatic counting mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Omnitronic MMP-1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info