Bedienungsanleitung Omron BF 306 (Seite 6 von 8) (Englisch)

483399

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

3.5 Setting and using personal memory number

The Omron BF 306 body fat monitor has a memory function.

This function enables you to store the data for 9 persons.

Push the O/ I button

All the display segments turn on

When you want to set the personal memory number and store

personal data:

Select the personal memory number.

1. Push the

▼/▲

button and select a

personal number from 1 to 9.

2. Push the Set button.

The personal number turns on and changes

to height setting mode.

3. Set the personal data - continue with step

3 paragraph 3.3 "Setting personal data".

Taking a measurement by using your personal memory (be

sure the device is on):

Search your personal memory number

1. Push the

▼/▲

button to select your memory number

2. Push the Set button.

The memory number is indicated and your personal data is

displayed.

3. Carry out the measurement.

Refer to "To take the measurement” paragraph 3.4

3.6 To change any values

1. Push the Set button to go to the personal data you want

to change.

2. Push the ▼/▲ button to change the setting.

By pushing both the ▼/▲ buttons at the same time, the

current flashing display will reset to the initial value.

How to delete all 9 personal data values from the memory

1. Push the ▲ button and select the memory No. 1.

2. Push the SET button for 2 seconds.

3. All personal data is deleted and all.

4. The display segments turn on.

(Same state as when the O/I button is pushed.)

If you leave the set items on the screen without confirma-

tion, in approximately 1 minute the display will change to

the initial values or the to values before setting.

After 1 minute, the unit will automatically turn off.

If your age, weight, or height has changed, correct the

value accordingly.

4. HOW TO INTERPRET MEASURED

RESULTS

4.1 BMI Value

BMI is an internationally used index to show the body

condition by checking the balance between the height and

the weight.

It is calculated by the following formula:

BMI = weight / height

BMI BMI value*

< 18.5 LOW

>18.5 and < 25 NORMAL

> 25 and < 30 HIGH

> 30 TOO HIGH

* The above mentioned indices refer to the values for obesity proposed

by the WHO (World Health Organization)

4.2 Body fat percentage

Displays the body fat mass as the percentage of body weight.

Obesity judgment Low Normal

High Too high

English

BODY FAT MONITOR BF306

0% 10% 20% 30% 40% 50%

30 – 39

18 – 29

age

bodyfat%

40 – 49

50 – 59

60 – 70

Female

0% 10% 20% 30% 40% 50%

30 – 39

18 – 29

age

bodyfat%

40 – 49

50 – 59

60 – 70

Male

Graphical inter-

pretation of BMI

value (LOW >>

TOO HIGH)

Graphical inter-

pretation of

measured FAT%,

based on

Deurenberg’s*

table below

13413 manual BF306 INT_13413 manual BF306 INT 11/12/28 23:38 ページ 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Omron BF 306 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Omron BF 306

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info