Bedienungsanleitung One for All 8-Device Universal Remote with Learning (Seite 10 von 20) (Englisch)

492801

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

OWNER’S MANUAL

Checking the Codes 9

at all, try searching for your code. For

example, to search for a code for your TV:

1. Turn on your TV and on the remote

control, press TV once.

2. Press and hold SET until the LED (red

light) blinks twice, then release SET.

3. Enter 9 9 1. The LED will blink twice.

4. Select a test function from the list

below or use the default test function

(POWER) and skip step 4.

NOTE: The keys that can be used for the test

function are 0, 1, 2, 3, POWER, VOL +, Play,

Stop and Mute.

5. Press CH+ to begin searching for your

code. Stop the search when the device

turns off or performs the function

selected in step 4 (if other than

POWER).

NOTE: In the search mode, the remote control

will send IR codes from its library to the

selected device, starting with the most

popular code first. Every press of CH+ will

send a new code. If you go past the code that

performed the Test Function, you can go back

by pressing CH-.

6. To lock in the code, press and release

the SET key. The LED blinks twice.

7. To search for the codes of your other

devices, repeat steps 1 through 6, but

substitute the appropriate device key

for the device you are searching for in

step 1.

CHECKING THE CODES

If you have set up the remote control using

the Searching For Your Code procedure, you

may need to find out which four-digit code

is operating your equipment. For example,

to find out which code is operating your TV:

1. On the remote control, press TV once.

2. Press and hold SET until the LED (red

light) blinks twice, then release SET.

3. Enter 9 9 0. The LED will blink twice.

4. To view the code for the first digit,

press 1 once. Wait 3 seconds, count the

LED blinks (e.g., three blinks = 3) and

write down the number in the leftmost

box in the TV code boxes on page 7.

NOTE: If a code digit is 0, the LED will not

blink.

5. Repeat step 4 three more times for

remaining digits. Use 2 for the second

digit, 3 for the third digit, and 4 for the

fourth digit. Write down the code

digits in the remaining TV code boxes

on page 7.

6. To check for codes of other devices,

repeat steps 1 through 5, but substitute

the appropriate device key for each

device you are checking. Write down

the device’s code digits in the

appropriate code boxes on page 7.

USING MACROS

You can pro g ram the M1 and M2 keys on

your One For All 8L Universal Remote

Control with Learning (URC-8820 B00) to

perform repetitive, time-consuming

operations for easy, convenient access

through the press of a single key.

Macro keys are ideal for home theater

operations, setting a favorite channel, guide

steps, or other multiple functions you would

like to control with one key press. Moreover,

each macro key can hold up to a total of 20

key presses.

NOTE: Programming a new macro over an

existing one will erase the original macro.

OFA 8L with Learning Owners Manual.fm Page 9 Monday, January 24, 2005 10:04 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All 8-Device Universal Remote with Learning Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info