Bedienungsanleitung One for All 8-Device Universal Remote with Learning (Seite 11 von 20) (Englisch)

492801

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ONE FOR ALL 8L UNIVERSAL REMOTE CONTROL WITH LEARNING

10 Using Macros

PROGRAMMING A FAVORITE CHANNEL

With so many channels available through

your cable or satellite system provider, you

can program a macro that directly selects a

favorite channel with one key press.

For example, let's assume your favorite cable

programs are on channel 52. Use the

following instructions to program a macro

key for direct access of this channel:

NOTE: This example assumes the TV is tuned

to the correct Input to view your cable box.

1. Press and hold SET until the LED (red

light) blinks twice, then release SET.

2. Enter 9 9 5. The LED will blink twice.

3. Select an open macro key (e.g., M1)

and press it once.

4. Press CBL/SAT once.

5. Enter the channel number: 5 2.

NOTE: If you have access to over 100 channels,

enter 0 5 2. Moreover, if the original remote

control requires you to press ENTER to change

the channel, also press ENTER after the

channel number (e.g., 0 5 2 ENTER).

NOTE: You can program up to 20 functions on

the macro keys.

6. Press and hold SET until the LED blinks

twice, then release SET.

Now when you press M1, you will instantly

see cable channel 52 on your TV set.

PROGRAMMING A MASTER POWER MACRO

In its default state, the POWER key on the

One For All 8L Universal Remote Control

with Learning (URC-8820 B00) will

individually power your home

entertainment devices on or off. However,

you can also program a Master Power Macro

onto the POWER key that will sequentially

turn on or off all the devices with a single

key press.

To Program the Master Power Macro

1. Press and hold SET until the LED (red

light) blinks twice, then release SET.

2. Enter 9 9 5. The LED will blink twice.

3. Press the POWER key once.

4. For the first device you want in the

power-on sequence, press its device

key (e.g., TV) once.

5. For the second device you want in the

power-on sequence, press its device

key (e.g., CBL/SAT) once.

6. For the Third device you want in the

power-on sequence, press its device

key (e.g., AUD) once.

7. Repeat step 6 up to five more times to

add the other desired devices to the

power-on sequence (e.g., VCR, DVD, CD,

PVR and AUX).

8. To save the settings and exit the

program, press and hold SET until the

LED blinks twice, then release SET.

To Operate Master Power Macro

1. After programming, point the remote

control at the devices and press POWER

for at least 2 seconds to sequentially

turn on (or off) your devices.

NOTE: When you press POWER for less than 2

seconds, a power command will only be sent

to the currently-selected device. This allows

you to still individually power devices on or

off.

2. Devices will turn on (or off) according

to your programmed sequence.

NOTE: The currently-selected device will

always turn on or off first, followed by the

remaining programmed sequence. After the

master power sequence has been completed,

OFA 8L with Learning Owners Manual.fm Page 10 Monday, January 24, 2005 10:04 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All 8-Device Universal Remote with Learning Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info