REASSIGNING THE DEVICE KEYS
The Topline 5 can operate any combination of five devices you want (for
example: 2-TVs, 1-VCR, 1-Satellite, 1-Amplifier). To do this, you must reassign
the necessary keys.
For example, to place a second TV on the CD key:
Press and hold the MAGIC key until display screen
changes from [DEVICE and the TIME] to [TIMED SEQ].
Press MENU- twice, the display will change to
[CONFIGURE]. Press ENTER and the display will change to
[TIME SETUP].
Press MENU- two times and the display will read [DEV
CHANGE]. Press ENTER. The display will read [FROM DEV]
Press the DEVICE KEY you would like to move. In this
example, you would press TV. The display will read [COPY
TO]. Then press the unused DEVICE KEY you would like
to replace. In this example, you would press CD. The
display will change to [TV2 and TIME]. Now your second
TV can be programmed under the CD key.
Continue with setting up this device with the appropriate
3-Digit Code as was described on page 11.
To reset a device key back to its orginal function repeat the steps above only
press the same device key twice during step 4.
15
Basic Functions
1
2
4
5
3
Notes:
- To reassign any device key, follow the instructions above only substitute
the correct device keys during step 4.
- If you have moved a device key which contains more than one type of
device (ie: SAT key contains Satellite and Cable), you will need to refer to
the chart on page 11 during step 4.
